Trunk spolier, non SSS
Thread Starter
Newbie
Joined: Mar 2007
Posts: 28
Likes: 0
From: Yankee Stadium
Trunk spoiler, non SSS
Has anyone with the smaller, non SSS wings taken off the wing and left just the little trunk spoiler? I'm curious to see how much trouble this would take and how this would look but I'm not sure i want plugged holes in my trunk.
I took the wing off today, that double sided tape or whatever they use is a *****. takes a lot of leverage to get that thing off and be careful as you can dent the hatch quite easily and bend it. Looks good though without it. I still need to get some plugs? Anyone know where to pick some up that would look good, my evo is WW.
Thread Starter
Newbie
Joined: Mar 2007
Posts: 28
Likes: 0
From: Yankee Stadium
The more I think about it the more I want to trade for the bigger wing. My smaller wing has a lip on the edge of the trunk that I have noticed some non SSS X's don't have. Anyone else notice this?
Trending Topics
Evolving Member
Joined: Mar 2008
Posts: 343
Likes: 0
From: Pascagoula, MS
An Evo's gotta have a spoiler! If not a stock one, then a bigger one. 
Not my car, but you get the idea.
(http://body-kit.com/2008Lanevox.html)
Not my car, but you get the idea.
(http://body-kit.com/2008Lanevox.html)
Thread Starter
Newbie
Joined: Mar 2007
Posts: 28
Likes: 0
From: Yankee Stadium
Its a 10 millimeter bolt on the inside of the trunk and a 10 millimeter nut tightened on to the stud of the wing on each side of the trunk. There's quite a bit of double sided tape that sticks on to the trunk. You have to becareful when pulling it off as to not bending the trunk out of shape. If you use something flat and thin to get in between the tape and the trunk, you have to becareful not to damage the paint as this area will likely rust.
Last edited by AJsGenerX; Apr 4, 2008 at 05:20 AM.