I know this may be a noob question but i am wondering if someone can write up a how to on replacing/swapping out brake pads for track days. I am looking to go to track days this season and am going to need to learn how to do this. Maybe someone can take pics as they are doing it? Any help would be greatly appreciated. Thanks!

 

Isn't it no different then the Evo 8 and 9 w/ brembos, just take the wheel off, take out the 2 pins holding the pad, take a flat head w/ a towel wrapped around in and push the piston back and swap the pads. Pretty easy when i had my 8 havent changed my X's yet.

 

The hardest part is trying to not chip the paint when punching the pin in and out.

OP you should search. This (and the stuff in your other thread) has been covered before.