So I haven't found out how to remove the foglight covers, bezels, etc.. Anyone know? Thanks

 

I did this to mine already.
Remove front bumper. Remove fog lights from bumper. Disassemble the fog lights. And finally put the overlay or tint(I used yellow tint). Also red out my taillights.

 

headlightarmor.com has a bunch of light vinyl covers. i bought my yellow tint from them and nokya hyper yellow bulbs off amazon.

 

thanks guys!

 

What are you trying to do? Just install the yellow tint over the fog lights? If so use soap and water put them on let dry a bit and squeegee down then use heat gun to completely dry and wrap endges around light. I dint understand why you would remove bumper and fog light lens. By the way I do this for a living so if you have questions pm me.

 

+1
i do bodywork/carbon stuff. soap water is your best friend.

 

thats what i was wondering i didnt really want to take off the front bumper

 

It was easier imo to wrap around the whole fog light lens with it apart than to try to wrap while the covers on. Doing taillights and headlight yes easier to do because nothing around them.

 

The tint should not be much bigger than the light itself. I have tinted a ton of headlights, tail lights, and fog lights on Evos, Ralliarts, VWs, 350Zs, Mustangs, etc. and not once ever removed a bumper to install. **** I did my Ralliarts fogs in less than 10 minutes!

 

Has your car been inspected since you added the red tint to the tail-lights? In PA (and many/most other states), back-up lights must be white.

 

Got inspected last month. No problem. Also have not been pulled over yet for tail lights.

 

Hey bro sorry I'm new to the forum I just got a evo x and I'm trying to get fog lights I looked into the vinyl cover and light bold how did this combo work for you I'm lookin for a bright yellow light not green because I seen some people getting green light when mixing vinyl and yellow light bulbs please and thank you

 

Don't even mess with the yellow tint. I tried it and didn't last very long. Get a set of 2000K yellow foglight bulbs. I run these and love them.

 

Is this the size for the evo X because I just order some but I got the h11 Nokya hyper yellow I think😩

 

Tried to do it with the cover on and it is a pita. It is also not perfect. You should wait until you need to take off your bumper, like painting your coolant line black or something.

You will have a better coverage and easier time if you remove the covers first.