New Pickups: Amuse/AMS/ID/Mishimoto/Varis & More
Thread Starter
Newbie
Joined: Oct 2009
Posts: 31
Likes: 3
From: Long Island, NY
New Pickups: Amuse/AMS/ID/Mishimoto/Varis & More
This is long overdue! Have been traveling so much that I haven’t had a free day until today. A few of my goodies have arrived.
Special thanks to my man and buddy in crime Sean @DSGPerformance.com. It’s been quite the journey throughout the years. This spring/summer is going to be fun!
Enjoy the pics.
Amuse R1 Titan Exhaust! Enough said!
This piece is just gorgeous from top to bottom.
Didn’t want to unwrap all the plastic as it won’t be installed for a bit. You can somewhat make out the burnt titanium awesomeness that lies beneath.
Even though I said I would unwrap everything I just couldn’t resist peaking at the tips. As you can see it was wrapped in bubble after being shrink wrapped. Can you say “Full Burnt Titanium with Gold Rings!”
Mmmhm
To compliment high flow awesomeness I chose the AMS Resonated Test Pipe
Solid AMS quality.
To protect this beauty I looked to Varis. Rear Cabon Diffuser!
Gotta love Varis! Piece is gorgeous through and through.
A little Varis John Hancock
Up next I have the infamous AMS 750 kit! I am very excited about this. Has been a long time coming for sure. All piping in the engine bay is AMS wrinkle black. Still on the fence about what color I want my valve cover to be but I like the small pops of red to compliment all the wrinkle black piping. The options I chose were recirculated Wastegate; Red Tial MVR 1.0 Bar Red; Cold Air Intake Wrinkle Black w/ Heat Shield. I plan on using the same heat shielding @Madmartigan is using. This baby was packed so tight that I only took out the big items to inspect or else I would never get the box closed again.
Like I said… tight but filled with so much goodness!
Well hello there!
Staying with the small pop of red theme. Behold the Tial Wastegate.
Moving past the downpipe and the intake bull**** for the New Turbo! Securely wrapped in bubble and plastic.
Special thanks to my man and buddy in crime Sean @DSGPerformance.com. It’s been quite the journey throughout the years. This spring/summer is going to be fun!
Enjoy the pics.
Amuse R1 Titan Exhaust! Enough said!
This piece is just gorgeous from top to bottom.
Didn’t want to unwrap all the plastic as it won’t be installed for a bit. You can somewhat make out the burnt titanium awesomeness that lies beneath.
Even though I said I would unwrap everything I just couldn’t resist peaking at the tips. As you can see it was wrapped in bubble after being shrink wrapped. Can you say “Full Burnt Titanium with Gold Rings!”
Mmmhm
To compliment high flow awesomeness I chose the AMS Resonated Test Pipe
Solid AMS quality.
To protect this beauty I looked to Varis. Rear Cabon Diffuser!
Gotta love Varis! Piece is gorgeous through and through.
A little Varis John Hancock
Up next I have the infamous AMS 750 kit! I am very excited about this. Has been a long time coming for sure. All piping in the engine bay is AMS wrinkle black. Still on the fence about what color I want my valve cover to be but I like the small pops of red to compliment all the wrinkle black piping. The options I chose were recirculated Wastegate; Red Tial MVR 1.0 Bar Red; Cold Air Intake Wrinkle Black w/ Heat Shield. I plan on using the same heat shielding @Madmartigan is using. This baby was packed so tight that I only took out the big items to inspect or else I would never get the box closed again.
Like I said… tight but filled with so much goodness!
Well hello there!
Staying with the small pop of red theme. Behold the Tial Wastegate.
Moving past the downpipe and the intake bull**** for the New Turbo! Securely wrapped in bubble and plastic.
Last edited by RedL1neX; Feb 1, 2015 at 06:09 PM.
Thread Starter
Newbie
Joined: Oct 2009
Posts: 31
Likes: 3
From: Long Island, NY
Up next is cooling… Continuing with AMS and the wrinkle black theme. Alas the AMS FMIC and AMS Upper intercooler piping. The AMS Lower Piping and to come, was shipped in another box. Having inspected the ARC FMIC up close and now the AMS I can say that AMS shines.
AMS Lower Intercooler piping in wrinkle black with Tial BOV (Red) and fueling to compliment my new 750 kit. AMS Fuel Rail, AMS Fuel Pressure Regulator kit.
Up next… More fueling support! Injector Dynamics 1000cc Injectors w/ pnp adapter, Walbro 450 Fuel Pump w/ Install Kit & Torque Solutions Fuel Pump Holder.
And for good measure. AMS Fuel Feed Drain Line.
Cant forget about the Mishimoto X Line Radiator.
And this picture is mostly for my good bud Sean! Im running out of space! Cannot wait to get these on my X. The wait is killing me.
Thanks for looking. Have a bunch of other goodies on their way. Waiting on my Varis CF Hood and Volks CE28s at the moment. Will have much more in-depth photos during the build. At which point the “official” build thread will launch. Scott@Kaizen get back to me when you can
-Geoff
AMS Lower Intercooler piping in wrinkle black with Tial BOV (Red) and fueling to compliment my new 750 kit. AMS Fuel Rail, AMS Fuel Pressure Regulator kit.
Up next… More fueling support! Injector Dynamics 1000cc Injectors w/ pnp adapter, Walbro 450 Fuel Pump w/ Install Kit & Torque Solutions Fuel Pump Holder.
And for good measure. AMS Fuel Feed Drain Line.
Cant forget about the Mishimoto X Line Radiator.
And this picture is mostly for my good bud Sean! Im running out of space! Cannot wait to get these on my X. The wait is killing me.
Thanks for looking. Have a bunch of other goodies on their way. Waiting on my Varis CF Hood and Volks CE28s at the moment. Will have much more in-depth photos during the build. At which point the “official” build thread will launch. Scott@Kaizen get back to me when you can
-Geoff
Thread Starter
Newbie
Joined: Oct 2009
Posts: 31
Likes: 3
From: Long Island, NY
Done deal! X is hibernating while I finish picking up what I need to start.
Thanks, pictures do not do these justice. For the build I will be shooting with my dslr.
Haha it just takes a bit of patience. Ive had my X since 08. Im only going retard now lol
Trending Topics
Former Sponsor
Joined: Jul 2014
Posts: 128
Likes: 0
From: Montreal
Oh man oh man oh man oh man!
Buddy, thank you for the shout out and more so the incredible pics as always. I am beyond excited to see your build finally come together - it's going to be a good one!!
- Sean @DSG
Buddy, thank you for the shout out and more so the incredible pics as always. I am beyond excited to see your build finally come together - it's going to be a good one!!
- Sean @DSG
Thread Starter
Newbie
Joined: Oct 2009
Posts: 31
Likes: 3
From: Long Island, NY
On a side note... I got in touch Mr. Kaizen himself (Scott) today. We're speaking this Monday about the build and getting it on Calendar. Looking like it's gonna go down between March-May. Just in time for the good Northeast weather! The photoshoot will be most epic indeed!
Thread Starter
Newbie
Joined: Oct 2009
Posts: 31
Likes: 3
From: Long Island, NY
