ATEQ Mitsureset TMPS Tool
#1
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: USA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
ATEQ Mitsureset TMPS Tool
Has anyone tried the ATEQ tool?
The other thread mentioning ATEQ was from 2012, which did not work with the Outlander/Lancer.
http://www.ateqtpm.com/mitsureset/
The other thread mentioning ATEQ was from 2012, which did not work with the Outlander/Lancer.
http://www.ateqtpm.com/mitsureset/
#7
If you read my post you will see I didn't use it so unless you want to give me full price for it I'll return it for a full refund.
You will need the mistu reset tool and a trigger tool. Total cost was right at $280 total
You will need the mistu reset tool and a trigger tool. Total cost was right at $280 total
Trending Topics
#12
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: USA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
I read on the other forum that the tool (previous version) allows reprogramming and disabling of the TMPS sensors/system.
Appreciate the feedback, Chance575
#14
Former Sponsor
iTrader: (5)
You still have to have 4 tpms sensors on the car, I can source you a set of 4 alligator sensit sensors and valves for under $250 free shipping, these would be programmed to clone your OEM wheels.
I think this works for folks that have bought a set of used wheels with some sensors in them or for folks that have gotten rid of their OEM TPMS and do not have the codes.
I think this works for folks that have bought a set of used wheels with some sensors in them or for folks that have gotten rid of their OEM TPMS and do not have the codes.
#15
Mitsureset on eclippse
mitsureset is working on mitsubishi lancer, rvr and outlander is correct.
needs to do factory reset after each vehicle using webVT
seems the unit has some memory of the sensors
tried with eclippse, it didn't work, eclippse needs standard odbII
i am thinking that if i program the mitsureset with my rvr using the eclippse's tpms sensors and after programming, then connect the mitsureset to the eclippse, it will work, can anybody try this idea? if this is so, mitsureset and VT30 will do standard odbII
needs to do factory reset after each vehicle using webVT
seems the unit has some memory of the sensors
tried with eclippse, it didn't work, eclippse needs standard odbII
i am thinking that if i program the mitsureset with my rvr using the eclippse's tpms sensors and after programming, then connect the mitsureset to the eclippse, it will work, can anybody try this idea? if this is so, mitsureset and VT30 will do standard odbII