I know there are appropriate threads for wheel fitment, but i had to have posted in 4 threads w/ here and evom and nothing was determined. So i will take any help offered.

im looking into getting Drag Dr 31s in 18x9" et15. I was originally looking at 9.5" with an offset of 20-25. If my math is right, 9" et15 should b roughly the same as a 9.5" et22. Im just trying to make sure these will clear the brembos. Thanks in advance.

 

I am not sure about the 15 offset but I was told by multiple vendors that the 18x9 28 offset would fit if that helps.

 

last nite i did a lil more diggin and i did find an evo x with the drag dr-31s, but he didnt list an offset.

I dont think they look aggressive enough for et15s

 

hmm but in this pic they look a lot more flush than the 1st pic

 

i did the wheel math on this one:

et15 would b further out(from stock) ~29mm with flush being at 25mm=4mm past flush (+4)
et28 would b further out(from stock) ~16mm with flush being at 25mm=9mm in (-9)