how do you take off the front bumper?

 

with a 10mm wrench, and a phillips head screw driver. just find all of the bolts that look like they are holding the bumper on and start unscrewing. make note of which screws go where and ofcourse dont lose the screws. good luck with the last two screws..... you'll find out what that means.

 

Doesn't anyone have any information on how to take off the front bumper? Looking around for screws doesn't sound like much help (no offense). A how-to article for this would be very helpful, especially with pictures and arrows showing exactly where and what to enscrew and unbolt.

 

Unsrew all of the plastic screws and clips from the front of the inner wheel wells. Then unscrew all of the screws on the top of the bumper, under the hood (where the bottom of the grill would be). The last two screws are a little tricky to find. You need to be on your back under the car. I can't remember exactly, but I think you need to remove the plastic guards at the corners underneath the bumper, if not there will be holes in those peices with bolts about a foot above them, one on each side. After removing all bolts, kinda lift and pull the bumper away (it helps to have two people). Good luck.

 

got any pics about that?

 

I'll try to get you some tommorow.

 

thanks

 

they have plastic screws that you can see from underneath the car....