I'm looking to get a MBC and a flash so many guys have told me that I should get a BOV because of the added boost. Which one is the most usable for a daily? I don't want to be fluttering or stalling....

 

MR. No adjustments, just solid boost. Sounds pretty darn good too with my HKS RS.

 

Have had my APS on for the past 3 months. Just put it in and go. No idling issues, no stalling, no fluttering, no compressor surge. Works perfect!

 

Nice if anyone else has advice I would love to hear it...

 

EVONation - If you want something that provides a nice sound try the Go fast bits or the APS. If you want something stealth try the EVO JDM MR bov, GReddy Type S or the Tomei valve.

 

How about the JDM MR BOV ?

 

ok the forge is the best diverter valve/bov whatever u want to call it, hands down.

 

how much boost can the JDM MR BOV take anyhow?

 

I too have a forge, the VTA one, no stalling, no idling issures, the only problem is that there is some minor flutter at low end, but that can be taken car with some adjustment.

 

22psi tops

 

alright and stock turbo can push out how much lol. lets do the math here. is it worth get the jdm mr bov vs a other bov that can hold more boost for later mods.

 

I think it depends on the valve. I know of people who pressure tested their plastic stock valve to hold over 20 psi (most people say it leaks around 19). I have seen a few people say the MR is good for 24 to 25 pounds. I suggest you find one and test it.

 

APS BOV all the way

 

post some info with it just dont shout out what you have and what every one should have. details. like how much can hold. gosh

 

My MR BOV holds 25 psi no problem