Can anyone provided a picture of a Perrin test pipe Or UR test pipe with the O2 bung on it..Did some search and check out a few website but only found the VIII Test pipe, but no IX test pipe with the O2 bung

 

The UR test pipe is the same for the VIII and the IX and it does have the o2 bung on it. Take it from someone who has one.

 

These just got released w/ the revision for the IX.

 

Do you have to purchased the O2 simulator? Or is it a complete bolt on where once u installed it everything will be fine (i.e) No CEL

 

The Perrin pipe comes w/ the CEL fix (O2 simulator). Regardless of whether it's an 8 or 9, the ecu will pick up on the lack of a cat and throw a trouble code.

 

I will be purchasing a 02 simulator for my TBE, race pipe is it hard to install the perrin 02 simulator.. also will it pass emisions in states where it is required?

 

Not hard, it has to be soldered but it's 2 or 3 wires (can't remember off the top of my head). It's easy, and it has an LED that lights up so you know it's working.

The O2 sim sends an 'all clear' code to the ECU, so if you're not looking under the car, it will appear that everything is in order (it will pass and ODB2 scan).

 

perrin is the way to go. had mine on for a few days now and no check engine light or cel has popped up......

 

I'll take some pix of the UR test pipe once I get it

 

Guys what do I do now that my 3 inch test pipe from JUN B.L does not have a bung for the 02 sensor on my ix located on the test pipe ? I've never used an o2 simulator before. Where can I get a good one from or will any do? My exhaust is being shipped out today.

Thanks in advance.
Arbi

 

Perrin makes a good O2 sim: http://www.jscspeed.com/evo/downpipe/perrin_o2sim.htm

You will need to have a bung welded into the pipe, or put the O2 into the bung on the catback (provided it's designed for the VIII).

 

Here are the pix of the UR test pipe with built in o2 fix