I am putting my car back after it came back from the frame shop, but I am having a little problem remembering where all the wiring gos, can some one please send me some pictures of the wiring under the hood, thank you!

my email vlad54321@yahoo.com

 

I just did this last night. I found it easiest to start with the alternator and the starter and work back from each of them. The wiring harness is laid out in such a way that each connector can only reach one thing.

-Paul

 

I have not go to the motor yet, I am confused on the part that comes in from inside of the car, on the passenger side and driver side that go aorund the radiator and go to the power steering and all that good stuff, I have 2 bare ware just sticking out and not sure where that go and what plug I need for them...

THanks for the info!

 

Just like most of us do (you know what I mean) buying salvage cars......What happened though?

 

Not sure if this is what you're looking for

http://img.photobucket.com/albums/v2...t/IMG_5770.jpg

http://img.photobucket.com/albums/v2...t/IMG_5775.jpg

 

http://images.google.com/images?hl=e...-8&sa=N&tab=wi

 

I kind of need the corner where the over flow Tank is, there are allot of pictures in the net but there just basically of the motor and not the surroundings, I need to see one from the inside, there has to be some one here with no motor in there Evo right now that can take a snap shot form inside, thanks guys!

and yep its salvaged

 

might be easier if you take a picture of the wiring you need help with and post it

 

here are some pics that i found that may help you out. scroll down to the pics
https://www.evolutionm.net/forums/sh...ight=coil+pack

 

you're russian, right?

 

yep i am russian,

thanks evo150 for the picturs!