mitsulogger help
Thread Starter
Newbie
Joined: Aug 2006
Posts: 62
Likes: 0
From: Burney in NORCAL
so turn on the car and let it run still ? what's the whole thing about the rpm's when it's runing still? What will happen if i ran the car while it's running the program? by the way I am using the mitsulogger v1.6 beta 3
You turn on laptop, connect tactrix usb to laptop...open mitsulogger program. "start logging" ...u can log with the car off or on...wouldn't make sense to log with the car off unless u wanna see what your start up looks like?" ...do you need anymore info? Hope not
Holy crap guys.. help him out!
You need to run the program while the car is moving. Most people will do a 3rd gear pull while logging to a good picture of how the car does during wide open throttle operations. So click "start logging" and go from about 2000 rpms to 7500 or so in 3rd gear, then "stop logging" and see what you get. If you have an email flash, this is most likely what your tuner will want to see.
You need to run the program while the car is moving. Most people will do a 3rd gear pull while logging to a good picture of how the car does during wide open throttle operations. So click "start logging" and go from about 2000 rpms to 7500 or so in 3rd gear, then "stop logging" and see what you get. If you have an email flash, this is most likely what your tuner will want to see.
Trending Topics
It is safe and it is what you are suppose to do in order to datalog. The reason you datalog is to log the different parameters of your ECU while driving to see how your tune is and to make adjustments where things don't look good. Hook it up and log a 3rd gear pull like I said above...