correct mitsi part number for evo 3 oil filter??
correct mitsi part number for evo 3 oil filter??
Hi,
my local Mitsibushi dealer cannot identify the correct oil filter for my 1995 Evo 3. They reckon it could be one of 2 different ones.
The one fitted at present is a Fram one, so no help there and even though i could just see which one of the 2 suggested fits, i would like some reassurance.
Does anyone know the correct part number?
my local Mitsibushi dealer cannot identify the correct oil filter for my 1995 Evo 3. They reckon it could be one of 2 different ones.
The one fitted at present is a Fram one, so no help there and even though i could just see which one of the 2 suggested fits, i would like some reassurance.
Does anyone know the correct part number?
hmmm....the one i think it is not, is the smaller one, which the parts girl said is for the VIII. The larger one, that is 10mm longer than the Fram filter that is currently fitted is the 1 i reckon it may be (until i read ur post).
I'm not fitting it till a bit later (today). If you get to your CD anytime soon, i would be very grateful for the exact number.
The ones i have in front of me are:
MZ690115 AND
MD 322 508
the md322508 is tiny approx 77mm diameter, 60mm long.
the other is approx 72 dia x 85mm
measuring max dia (around engine end)
tHANKS.
nm...i've done it now......i used the big one & it seems to fit ok (& it's gone 2km & the engine hasn't seized yet. in the end, although diff overall diameter, the rubber seal was the same size on both.
ok...update (FYI)....i've fitted the wrong one......
Looks like the correct one is MD 322 508 for Evo III
Mz690115 is for FTO GS
http://www.camskill.co.uk/products.p...23p7371&z=7684
http://www.camskill.co.uk/products.p...m8b17s281p7375
I'm not fitting it till a bit later (today). If you get to your CD anytime soon, i would be very grateful for the exact number.
The ones i have in front of me are:
MZ690115 AND
MD 322 508
the md322508 is tiny approx 77mm diameter, 60mm long.
the other is approx 72 dia x 85mm
measuring max dia (around engine end)
tHANKS.
nm...i've done it now......i used the big one & it seems to fit ok (& it's gone 2km & the engine hasn't seized yet. in the end, although diff overall diameter, the rubber seal was the same size on both.
ok...update (FYI)....i've fitted the wrong one......
Looks like the correct one is MD 322 508 for Evo III
Mz690115 is for FTO GS
http://www.camskill.co.uk/products.p...23p7371&z=7684
http://www.camskill.co.uk/products.p...m8b17s281p7375
Last edited by ghostface*_*kil; Jun 5, 2007 at 02:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Angeloj-Miranda
Evo General
0
Sep 8, 2015 05:19 AM
Hate_Times_Nine
Evo X Tires / Wheels / Brakes / Suspension
3
Jan 28, 2012 07:58 PM




