Which BOV?
If you really wanna change ur stock, get the Forge RS adjustable.. If you dont wanna get complicated, get the Forge Evo15 with preset springs.
They're both recirculating, perform great, look great..
Wael
They're both recirculating, perform great, look great..
Wael
You do know that the Tial is very difficult to utilize on a non speed density based vehicle (as any atmospheric BOV is).
Just go with the Forge RS, it's proven to hold in high boost applications, you can adjust it to reduce surge, and you won't have any problems with it in your setup (unless you are configured for speed density).
Good luck.
Just go with the Forge RS, it's proven to hold in high boost applications, you can adjust it to reduce surge, and you won't have any problems with it in your setup (unless you are configured for speed density).
Good luck.
Forge if you MUST have a BOV due to the partial recirc. Otherwise stock IX if you don't have a IX.
If you just change out your intake, it should allow you to hear the stock BOV just enough. Just leave the BOV alone for as long as you can, or unless you change to a MAP based system.
Ed
If you just change out your intake, it should allow you to hear the stock BOV just enough. Just leave the BOV alone for as long as you can, or unless you change to a MAP based system.
Ed
Thread
Thread Starter
Forum
Replies
Last Post





