Stock head/block hp?
Stock head/block hp?
IX MR, roundabouts on PUMP gas(93) what is the most HP that can be made? or has been seen? on the stock block and head with just headstuds and a MLS headgasket?
is 550-600 possible?
is 550-600 possible?
Last edited by InfamousTX; May 28, 2008 at 01:25 AM.
I don't see how its possible to run over 500whp on 93. A few of the Buschur cars have done it and frankly it blows me away.
Right now I am running all BR parts on my car. My engine is stock at the moment other than 280 cams and arp head studs. I have the hta 35R, 1000cc injectors, and an aem with tons of supporting mods. On 28psi, a conservative tune, and 100% alky I ran 524whp on my viii. With out the alky I can't imagine I would have been able to reach 500 without running lean with the boost that high imo.
Im in the process of building my engine with a race head. It will be interesting to see if I can reach 550whp with 93 and alky. (The only two things left that will be stock in my set up, for the time being, are the throttle body and intake manifold)
Right now I am running all BR parts on my car. My engine is stock at the moment other than 280 cams and arp head studs. I have the hta 35R, 1000cc injectors, and an aem with tons of supporting mods. On 28psi, a conservative tune, and 100% alky I ran 524whp on my viii. With out the alky I can't imagine I would have been able to reach 500 without running lean with the boost that high imo.
Im in the process of building my engine with a race head. It will be interesting to see if I can reach 550whp with 93 and alky. (The only two things left that will be stock in my set up, for the time being, are the throttle body and intake manifold)
Thread
Thread Starter
Forum
Replies
Last Post
YFZracer32
Evo Engine / Turbo / Drivetrain
15
Mar 22, 2021 10:50 AM
bickett
Evo Engine / Turbo / Drivetrain
1
Feb 23, 2016 09:35 PM



