Fill in the blanks..
#1
Newbie
Thread Starter
Join Date: Feb 2006
Location: TR
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Fill in the blanks..
Hi, I will start my building process soon and I choosed some parts but there are some parts that I am not confident with. So could you please fill in the blanks with the parts that you would go. My goal is 720whp on 97 RON pump gas with max 35psi of boost. I want to rev up to 8500rpm. This is my weekend car and will be used both for street and drag races.I do not want to remove the A.C and P.S. I don't want to try new setups every 6 months, I want to do it once and keep it. All comments are welcome. Thanks
- 2.2 lt stroker CP Pistons ( 8.3:1 or 8.5:1 ) ( will bought & can change also)
- Carillo PRO H beam Forged Rods with arp200 rodbolts ( will bought & can change also)
- 94mm K1 Forged Crank ( will bought & can change also)
- Cosworth main bearings ( will bought & can change also)
- Cosworth Oil pump ( will bought & can change also)
- Cylinder Head porting
- ............................. exhaust manifold
- ............................. downpipe
- ............................. Ball bearing Turbo ported + polished
- 2X Tial 44mm ext. wesgates ( will bought & can change also)
- ............................. ECU
- Cosworth 1mm + valves ( will bought & can change also)
- Magnus Street Intake manifold ( existing)
- Tomei 280 camshafts ( will bought & can change also)
- Tomei Cam gears ( will bought & can change also)
- Tomei Titanyum cam valves & retainers ( will bought & can change also)
- ............................. cc Injectors
- Perrin fuel Rail ( existing)
- walbro in tank fuel pump ( existing)
- Buschur double pump ( will bought)
- Fuel Regulator ( existing)
- Cooling Mist methanol injection ( existing)
- Silicone houses ( existing)
- Dei exhaust Wrap kit ( will bought)
- Arp Head Studs 11mm ( existing)
- HKS DLII ( existing)
- HKS FCD ( existing)
- HKS EVC 6 ( existing)
- HKS SSQV Bov ( existing)
- HKS Green mushroom intake kit ( existing)
- HKS Turbo Timer type 0 ( existing)
- 52mm digital intake temp gauge ( existing)
- ZEITRONIX AFR ( existing)
- Turbo back supersprint exhaust 70mm ( existing)
- ................................ Front Mount Intercooler with piping
- ................................ Slim Radiator
- ................................ Slim Fan
- ................................ dogbox
- ................................ LSD
- ................................ clutch
- ................................ lightweight flyweel
- 2.2 lt stroker CP Pistons ( 8.3:1 or 8.5:1 ) ( will bought & can change also)
- Carillo PRO H beam Forged Rods with arp200 rodbolts ( will bought & can change also)
- 94mm K1 Forged Crank ( will bought & can change also)
- Cosworth main bearings ( will bought & can change also)
- Cosworth Oil pump ( will bought & can change also)
- Cylinder Head porting
- ............................. exhaust manifold
- ............................. downpipe
- ............................. Ball bearing Turbo ported + polished
- 2X Tial 44mm ext. wesgates ( will bought & can change also)
- ............................. ECU
- Cosworth 1mm + valves ( will bought & can change also)
- Magnus Street Intake manifold ( existing)
- Tomei 280 camshafts ( will bought & can change also)
- Tomei Cam gears ( will bought & can change also)
- Tomei Titanyum cam valves & retainers ( will bought & can change also)
- ............................. cc Injectors
- Perrin fuel Rail ( existing)
- walbro in tank fuel pump ( existing)
- Buschur double pump ( will bought)
- Fuel Regulator ( existing)
- Cooling Mist methanol injection ( existing)
- Silicone houses ( existing)
- Dei exhaust Wrap kit ( will bought)
- Arp Head Studs 11mm ( existing)
- HKS DLII ( existing)
- HKS FCD ( existing)
- HKS EVC 6 ( existing)
- HKS SSQV Bov ( existing)
- HKS Green mushroom intake kit ( existing)
- HKS Turbo Timer type 0 ( existing)
- 52mm digital intake temp gauge ( existing)
- ZEITRONIX AFR ( existing)
- Turbo back supersprint exhaust 70mm ( existing)
- ................................ Front Mount Intercooler with piping
- ................................ Slim Radiator
- ................................ Slim Fan
- ................................ dogbox
- ................................ LSD
- ................................ clutch
- ................................ lightweight flyweel
Last edited by RUN99; Dec 24, 2009 at 04:07 AM.
#2
Account Disabled
iTrader: (5)
- ......Full-race TS T4..... exhaust manifold
- ......T4 HTA3586... Ball bearing Turbo ported + polished **no need to port or polish**
- ....AEM, Motech, haltech, stock..... ECU ***all options work great, talk to your tuner to find out what they are most comfortable with.
- .....RC or injector dynamics 1000cc or larger..... cc Injectors ***do you plan to use E85 or Q16?***
- .......FR....... Front Mount Intercooler with piping
- ........PWR unit 40mm is perfect......... Slim Radiator
- .......Tons of good options, just use a relay to power it....... Slim Fan
- ......quaife, Carbonetic..... LSD
- ......Carbonetic triple disc....... clutch
- ......Carbonetic and most multi disc units will come with fly wheel....... lightweight flyweel
- ......T4 HTA3586... Ball bearing Turbo ported + polished **no need to port or polish**
- ....AEM, Motech, haltech, stock..... ECU ***all options work great, talk to your tuner to find out what they are most comfortable with.
- .....RC or injector dynamics 1000cc or larger..... cc Injectors ***do you plan to use E85 or Q16?***
- .......FR....... Front Mount Intercooler with piping
- ........PWR unit 40mm is perfect......... Slim Radiator
- .......Tons of good options, just use a relay to power it....... Slim Fan
- ......quaife, Carbonetic..... LSD
- ......Carbonetic triple disc....... clutch
- ......Carbonetic and most multi disc units will come with fly wheel....... lightweight flyweel
#3
Newbie
Thread Starter
Join Date: Feb 2006
Location: TR
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
- ......Full-race TS T4..... exhaust manifold
- ......T4 HTA3586... Ball bearing Turbo ported + polished **no need to port or polish**
- ....AEM, Motech, haltech, stock..... ECU ***all options work great, talk to your tuner to find out what they are most comfortable with.
- .....RC or injector dynamics 1000cc or larger..... cc Injectors ***do you plan to use E85 or Q16?***
- .......FR....... Front Mount Intercooler with piping
- ........PWR unit 40mm is perfect......... Slim Radiator
- .......Tons of good options, just use a relay to power it....... Slim Fan
- ......quaife, Carbonetic..... LSD
- ......Carbonetic triple disc....... clutch
- ......Carbonetic and most multi disc units will come with fly wheel....... lightweight flyweel
- ......T4 HTA3586... Ball bearing Turbo ported + polished **no need to port or polish**
- ....AEM, Motech, haltech, stock..... ECU ***all options work great, talk to your tuner to find out what they are most comfortable with.
- .....RC or injector dynamics 1000cc or larger..... cc Injectors ***do you plan to use E85 or Q16?***
- .......FR....... Front Mount Intercooler with piping
- ........PWR unit 40mm is perfect......... Slim Radiator
- .......Tons of good options, just use a relay to power it....... Slim Fan
- ......quaife, Carbonetic..... LSD
- ......Carbonetic triple disc....... clutch
- ......Carbonetic and most multi disc units will come with fly wheel....... lightweight flyweel
Thanks for the response, Instead of 3586 what else can you suggest to me? For example HTA88,6262 ts, pt67,gt850r,gt950r,4088r,4094r, borg warner??
Do you have feedbacks about these turbos according to T4 HTA86 TS setup?
Last edited by RUN99; Dec 22, 2009 at 04:43 AM.
#4
Account Disabled
iTrader: (5)
Thanks for the response, Instead of 3586 what else can you suggest to me? For example HTA88,6262 ts, pt67,gt850r,gt950r,4088r,4094r, borg warner??
Do you have feedbacks about these turbos according to T4 HTA86 TS setup?
Do you have feedbacks about these turbos according to T4 HTA86 TS setup?
#5
Former Sponsor
iTrader: (211)
You asked me to comment on the build and IMO most of the parts on that list i wouldnt use myself personally..
A Carbonetic BTW is 1 of the BIGGEST OVERPRICED POS clutches for the Evo.. The disintegrate and take everything in their way with them.. Not 1 FAST car runs that clutch that i know of..
Mike
A Carbonetic BTW is 1 of the BIGGEST OVERPRICED POS clutches for the Evo.. The disintegrate and take everything in their way with them.. Not 1 FAST car runs that clutch that i know of..
Mike
#6
Account Disabled
iTrader: (5)
Hey Mike hope your not referring to FR parts listed
Carbonetic clutches are not what i would recommend for a full drag car (which i know AWD motorsports/Mike do a great job building)
If you are looking for a good high HP clutch on a street car with good pedal feel the carbonetic is great and will hold your power while keeping your left leg the same size as your right. If you are looking to take the car to the track and launch regularly then a more aggressive ceramic set up such as Exedy would be a better choice.
Carbonetic clutches are not what i would recommend for a full drag car (which i know AWD motorsports/Mike do a great job building)
If you are looking for a good high HP clutch on a street car with good pedal feel the carbonetic is great and will hold your power while keeping your left leg the same size as your right. If you are looking to take the car to the track and launch regularly then a more aggressive ceramic set up such as Exedy would be a better choice.
#7
Newbie
Thread Starter
Join Date: Feb 2006
Location: TR
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Most of the turbos you listed are a decent amount larger than the HTA86 and will spool slightly slower. With your power goals of 750whp the HTA86 would be a good choice for the best response. If you think you may want more power in the future or simply do not want to push HTA86 the GT4088R or HTA 88 would both be great choices. There are also some great BorgWarner choices, the 88/75 would be a great choice fallowed by the 91/79.
Trending Topics
#8
Newbie
Thread Starter
Join Date: Feb 2006
Location: TR
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
You asked me to comment on the build and IMO most of the parts on that list i wouldnt use myself personally..
A Carbonetic BTW is 1 of the BIGGEST OVERPRICED POS clutches for the Evo.. The disintegrate and take everything in their way with them.. Not 1 FAST car runs that clutch that i know of..
Mike
A Carbonetic BTW is 1 of the BIGGEST OVERPRICED POS clutches for the Evo.. The disintegrate and take everything in their way with them.. Not 1 FAST car runs that clutch that i know of..
Mike
thanks for the reply. Whole list can change no problem. I am really interested about your suggesitons?
#11
Newbie
Thread Starter
Join Date: Feb 2006
Location: TR
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
#12
Newbie
Thread Starter
Join Date: Feb 2006
Location: TR
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
#13
Account Disabled
iTrader: (5)
no hta 88 option at this point (FP used to offer this however it has been discontinued in favor of the 82 and 86) As for spool time between the 4088R and 3586R there are a few variable in the turbo/manifold options (open and twin scroll turbine housing for the HTA3586 vs TS turbines on the 4088R) let the dyno graph search commence!
Thread
Thread Starter
Forum
Replies
Last Post
georg1970
Mitsubishi Vehicles (Airtrek / Outlander)
50
Dec 20, 2021 03:19 AM
khmerpimpin
Evo Dyno Tuning / Results
35
Oct 6, 2013 09:47 AM