New Evo Owner from Amsterdam(NL)
Thread Starter
Newbie
Joined: Jan 2010
Posts: 26
Likes: 0
From: Amsterdam, The Netherlands, Europe
New Evo Owner from Amsterdam(NL)
Hello,
My name is Shaffy and I’m 22 years old. First of all I would like to apologize for any mistakes in grammar and/or spelling since English is not my primary language. I promise u that I will do my best to make this topic, easy to read.
I live in Amsterdam (Yes the city with the red lights district and a lot of marihuana and hasj), this is the capital of the Netherlands. The Netherlands is a very tiny country located next to Germany and Belgium.
I’m a student, I study automotive engineering. Since a few months I own a beautiful red Evo 8 EDM equipped with AYC/ACD(OEM). But more about the car later on…
My hobby’s are building scooters (I think u call them mopeds) and I like to work on my car.
Some of my projects are shown below:
I still own this one…
Here in the Netherlands u are allowed to ride a scooter(moped) when u reach the age of 16.
For cars the age is 18. So that’s why a lot of young kids here first drive a scooter and then move on to a motorbike or car…
So for me it all started when I became 18 and got my drivers license. My first car was a Honda Civic (EK3) 1.5 SOHC Hatch. It was a really good car for a beginner. I loved the car… But I got bored because of the power(that wasn’t there)…
After this I bought an Opel Speedster...
This is a roadster with a 2.2 Litre engine putting out 147HP on a 800kg car. (I know I use metric units…). 0-100km/h(0-60mph) in 5.9 seconds.
Well after the speedster came the Evo VIII.
Well after awhile I put some mods on the car. The modlist will follow below the pictures…
Modlist:
Previous owner installed:
ECUTEK
Scorpion 2.5" Catback
I installed:
8000K Xenon kit
Carbon front lip
MR Vortex Generator
Ferodo DS2500 brakepads front
Invidia 3" Test pipe
AEM UEGO AFR kit
Megan 3" Downpipe
Schroth 4 point safety harness
Greddy Turbo Timer
Carbon exhaust heat shield
Mods waiting for assembly (in approx 1000 miles):
Evo 9 Turbo
GSC S2 Camshafts with Protech single valvespring kit
Exedy Stage 1 Organic clutch
Custom made carbon sideskirts (similar as rexspeed skirts but with a couple of mods)
Near future mods:
INJEN full intake
Tephramod MAF -> MAP
Forge OR HKS dumpvalve
Next year mods:
18” Rims (still not decided which ones)
Performance friction 2pc brake discs
Suspension tuning (Öhlins or Proflex?)
And a lot more!!!
My name is Shaffy and I’m 22 years old. First of all I would like to apologize for any mistakes in grammar and/or spelling since English is not my primary language. I promise u that I will do my best to make this topic, easy to read.
I live in Amsterdam (Yes the city with the red lights district and a lot of marihuana and hasj), this is the capital of the Netherlands. The Netherlands is a very tiny country located next to Germany and Belgium.
I’m a student, I study automotive engineering. Since a few months I own a beautiful red Evo 8 EDM equipped with AYC/ACD(OEM). But more about the car later on…
My hobby’s are building scooters (I think u call them mopeds) and I like to work on my car.
Some of my projects are shown below:
I still own this one…
Here in the Netherlands u are allowed to ride a scooter(moped) when u reach the age of 16.
For cars the age is 18. So that’s why a lot of young kids here first drive a scooter and then move on to a motorbike or car…
So for me it all started when I became 18 and got my drivers license. My first car was a Honda Civic (EK3) 1.5 SOHC Hatch. It was a really good car for a beginner. I loved the car… But I got bored because of the power(that wasn’t there)…
After this I bought an Opel Speedster...
This is a roadster with a 2.2 Litre engine putting out 147HP on a 800kg car. (I know I use metric units…). 0-100km/h(0-60mph) in 5.9 seconds.
Well after the speedster came the Evo VIII.
Well after awhile I put some mods on the car. The modlist will follow below the pictures…
Modlist:
Previous owner installed:
ECUTEK
Scorpion 2.5" Catback
I installed:
8000K Xenon kit
Carbon front lip
MR Vortex Generator
Ferodo DS2500 brakepads front
Invidia 3" Test pipe
AEM UEGO AFR kit
Megan 3" Downpipe
Schroth 4 point safety harness
Greddy Turbo Timer
Carbon exhaust heat shield
Mods waiting for assembly (in approx 1000 miles):
Evo 9 Turbo
GSC S2 Camshafts with Protech single valvespring kit
Exedy Stage 1 Organic clutch
Custom made carbon sideskirts (similar as rexspeed skirts but with a couple of mods)
Near future mods:
INJEN full intake
Tephramod MAF -> MAP
Forge OR HKS dumpvalve
Next year mods:
18” Rims (still not decided which ones)
Performance friction 2pc brake discs
Suspension tuning (Öhlins or Proflex?)
And a lot more!!!
Last edited by x187; Jun 17, 2010 at 02:42 AM.
Trending Topics
Thread Starter
Newbie
Joined: Jan 2010
Posts: 26
Likes: 0
From: Amsterdam, The Netherlands, Europe
Newbie
Joined: Jan 2010
Posts: 7
Likes: 0
From: Birmingham, AL
Sweet evo man welcome to the club, I just returned from Amsterdam last month ( while the trash men were on strike) It was my second time and i must say i cant wait to be back there. Not only do you live in the greatest city in the world now you have an badass car to drive congrats
Thread Starter
Newbie
Joined: Jan 2010
Posts: 26
Likes: 0
From: Amsterdam, The Netherlands, Europe
It's just a coincidence... By the way my brothers Evo (9) is an USDM spec. He has a smaller license plate, thats a sign that the car is imported from the states or Japan. In this instance the car is from the states. But now you do mention it, I have never seen an evo here with a sunroof 
. Guess that people don't want it because the sun doesn't shine that often!
. Guess that people don't want it because the sun doesn't shine that often!