Ok so I searched around and I could only find out how to bleed my brakes but I got AT fluid and i want to replace my oem brake fluid with the Super Blue! WHAT DO I NEED TO DO STEP BY STEP! HOW DO I FLUSH MY BRAKES....THATS MY BIGGEST PROBLEM. I WENT TO THE HOW TO BUT ITS ONLY ON BLEEDING BRAKES! I want to do this tonight! please help

 

Suck the old stuff out of the reservoir, fill it with the new fluid, and bleed the brakes until you see new fluid coming out of the calipers.

 

thanks but what should i use to suck out fluid?

 

maybe try a needle or a syringe? might take some time though as the syringe is small, unless a bigger size exists? not sure...

 

ya suck it out with anything, but they make brake fluid reservoirs that do it for you all you would have to do is just hook up to the air then you can hook it up to the calipers as well and it will just suck it out there as well! makes life alot easier check your local parts store they usually carry it!

 

Just buy a baster that is used for cooking or buy a power bleeder as seen here:http://www.amsperformance.com/cart/M...mance.com.html