Hello Evo community here it goes, Invidia Exhaust manifold, 20G turbo, Invidia 02 housing, 3" TBE, 750cc Injectors and Walbro 255, plus CBRD radiator I am going to get it tuned in 2 days will keep you guys posted if anyone is interested.

 

Welcome to EvoM! Post some pics of your car! Im sure everyone would love to see it!

 

Lets so those dyno numbers bud! Im going to estimate at least 300's since you have the IX 20g and TBE

 

I will find out tomorrow.....kinda nervous this is the first time the car will be on a dyno

 

I would hope for more then 300 with those mods..

 

welcome to the forum
post some pics and the dyno sheet when you have a chance

-anthony

 

Actually i just want to see a nice Evo

 

I know i got pictures of the car in my garage when i did the work on it i just cant figure out how to upload them i tried earlier and all i got was a "failed to upload" .....

 

It is because they are too big, resize em and upload

 

So here is the latest we put the car on the dyno and we found a boost leak, but i got two runs the last one was on 16pounds of boost that's all that was making it to the engine and i got 256 hp and 248 ft torque i am fixing the leak hopefully today and we'll see what happens from there. I put some pics up I will upload a Dyno sheet hopefully later on. BTW leak is on the throtle body right by the throtle position sensor.

 

OK here it goes i got the car tuned and attached is the dyno sheet....One question if anyone else has a 20G turbo please compare i want to know if the turbo i got is good or not both the tuner and i were hoping for better numbers. this is with 22psi of boost.

 

Im not sure that its a good 20g, My car almost made that with TBE, Intake and tune on CBRD's mustang dyno. My car made 272/272 at 23psi.

 

So I finally got an answer to who makes the turbo, Artisan is the name of the turbo and i got it from turbo-kits.com i just want to know if any one else has this turbo and what their results opinions are. I'm planning of taking the turbo off and send it in to have inspectec simply because i think the power level should be higher......................

 

I made 256 and 272 on my evo 8 turbo with tbe and intake. That was the base numbers before my retune. so I think your numbers are a bit low.

 

turbo-kits.com seems like one of the generic websites that make cheap turbo kits for everything.

I'd try to sell the turbo and go with a FP green or something of the like