Ok so when I go to boost the car breaks up and I have a hard time building boost. The only thing I did was clean the engine bay with degreaser and now it's doing this...any ideas?

I covered the MAF, Alternator, filter and the fuse box while I cleaned it

I removed the plug wire from cylinder one and there's liquid down there probably from cleaning my engine bay...going to let it dry over night

def let it dry over night and see how it works out tomorrow... reppin the otown haha

yah if you didnt let the air filter dry it could be messing up the maf readings.

It ended up being water from me washing my engine bay, soaked it up and let it dry overnight and it's as good as new!