Notices
EvoM New Member / FAQs / EvoM Rules New member? Come on in, introduce yourself, and get acquainted with the evolutionm.net posse :) FAQs will also be answered in here.

Need help

Thread Tools
 
Search this Thread
 
Old Jan 21, 2011 | 06:04 PM
  #1  
J-Money's Avatar
Thread Starter
Newbie
 
Joined: Jan 2011
Posts: 2
Likes: 0
From: Beaverton, Oregon
Need help

Hey everybody my name is jayson and i have 2005 EVO 8 i have owned it almost a year now and i got a big problem please help. So i was heading to work wednesday morning and i came up to a stop light it turn green and threw it in first and took off then went to shift into 2nd and nothing no clutch. i managed to get it home in first gear pulled it into the garage thought it just need to be bled the slave cylinder out good then topped the fluid back up and still nothing. i have a Exedy stage II clutch but almost positive it not the clutch. so i thought it might be the slave cylinder so i replaced it and still nothing. My next guess is the circlip on the throw out bearing came off but im not sure.

Any help would be great thanks
Reply
Old Jan 21, 2011 | 06:05 PM
  #2  
GearDownSon's Avatar
EvoM Staff Alumni
iTrader: (11)
 
Joined: Apr 2004
Posts: 1,531
Likes: 3
From: NC
Did it "pop" when you went to hit the clutch? Also check your master.
Reply
Old Jan 21, 2011 | 06:09 PM
  #3  
J-Money's Avatar
Thread Starter
Newbie
 
Joined: Jan 2011
Posts: 2
Likes: 0
From: Beaverton, Oregon
No pop just i had nothing its really irritating. and i dont want to just throw parts at it trying to fix. but yeah i checked the master and its fine.
Reply
Old Jan 21, 2011 | 06:12 PM
  #4  
GearDownSon's Avatar
EvoM Staff Alumni
iTrader: (11)
 
Joined: Apr 2004
Posts: 1,531
Likes: 3
From: NC
Not 100% sure but i could have been your clutch fork.
Reply
Old Jan 21, 2011 | 06:14 PM
  #5  
J-Money's Avatar
Thread Starter
Newbie
 
Joined: Jan 2011
Posts: 2
Likes: 0
From: Beaverton, Oregon
Yeah i didn't think of that but if Im new to the EVOs do i have to take out the trans to get to the clutch fork or?
Reply
Old Jan 21, 2011 | 06:17 PM
  #6  
GearDownSon's Avatar
EvoM Staff Alumni
iTrader: (11)
 
Joined: Apr 2004
Posts: 1,531
Likes: 3
From: NC
I have a ralliart an yes i had to take out mine. So make sure you know its not the master or slave.
Reply
Old Jan 21, 2011 | 06:25 PM
  #7  
J-Money's Avatar
Thread Starter
Newbie
 
Joined: Jan 2011
Posts: 2
Likes: 0
From: Beaverton, Oregon
Nice ride. I will for sure check the master cylinder again the slave is brand new. Also do i have to take both CV axles out or just the driver side? do you know how much a new clutch fork is? and is there a aftermarket stronger one i could get?
Reply
Old Jan 21, 2011 | 06:37 PM
  #8  
GearDownSon's Avatar
EvoM Staff Alumni
iTrader: (11)
 
Joined: Apr 2004
Posts: 1,531
Likes: 3
From: NC
I had to. Like i said. I have a dif car. On one hand the fork isnt expensive but its a bish to get too.
Reply
Old Jan 21, 2011 | 06:40 PM
  #9  
J-Money's Avatar
Thread Starter
Newbie
 
Joined: Jan 2011
Posts: 2
Likes: 0
From: Beaverton, Oregon
just my luck haha what would the next possible problem be?
Reply




All times are GMT -7. The time now is 07:08 AM.