anyone know what front wheel bearings go in my 1997 rvr hypersport r please

 

What year is it? Which style of engine does it have? EVO1-3/DSM or EVO4+?

 

rvr hypersport r ...it has evo 3 engine in with td05 turbo...1997 on a r/reg

 

In that case, it is easy . Just use all the "usual" DSM mods, which are cheap and plentiful!

TD05 turbo is good for 300-400 hp, depending on which model you have. So you do not even need to change it for a while.

 

u wouldt know what wheel bearings go in my 1997 rvr hypersport r would u please and what brakes it has on could u...thanks ..john stone.

 

John,

You need to educate us about your RVR. Many here know a lot about Mitsu's, but not RVRs specifically!

Can you please take a bunch of photos (of your brakes) and we might be able to give you more information.

But these vans are strange, they have combination of: 1G/2G DSM and EVO1-3 parts.

 

thanks for the info mate will get some photos of brakes to post and dont supose u know what aft market exhaust is available for me truck....cheers.

 

galant vr4 brakes/hubs rear
grandis fronts

but depends on month of manufacture

 

You can't use 1G/GVR4 rear hubs. These vans have totally different axles.

I was able to run 13.4 on stock catback with 3" 1G DSM downpipe. So stock exhaust is not terrible. However, putting on a 3" cutout, netted 12.4's .

I want my van to sound as stock as possible, so I am determined to keep a stock exhaust