Boost control solenoid
Thread Starter
Newbie
Joined: Sep 2011
Posts: 0
Likes: 0
From: De Queen, Arkansas
Boost control solenoid
I'm trying to help a buddy out with hocking up his boost control solenoid, does the top hose go to vaccuum while the bottom goes to wastegate? And help would be appreciated.
top goes to the tube between the air cleaner and the turbo very little if any vacuum there. curious where does the subi get vacuum from? with the throttle open there is none.
Last edited by cfdfireman1; Oct 4, 2011 at 08:16 AM.
Thread Starter
Newbie
Joined: Sep 2011
Posts: 0
Likes: 0
From: De Queen, Arkansas
It also basically hooks into the intake, but the curiosity I had was if it DOES read vacuum how does it get it, if the sensor isnt hooked up. Btw you only no vacuum at wot. But that's beside the point.
Trending Topics
Thread Starter
Newbie
Joined: Sep 2011
Posts: 0
Likes: 0
From: De Queen, Arkansas
if you unhook my solenoid i would run wastegate pressure, which is much lower than what i'm tuned for. but it also needs To read vac/pRess to knOw when to aLLow the wastegate to open.