Notices
EvoM New Member / FAQs / EvoM Rules New member? Come on in, introduce yourself, and get acquainted with the evolutionm.net posse :) FAQs will also be answered in here.

Newbie in UK

Thread Tools
 
Search this Thread
 
Old Jun 17, 2012 | 02:36 AM
  #1  
Pezzar's Avatar
Thread Starter
Newbie
 
Joined: Jun 2012
Posts: 9
Likes: 0
From: Chichester
Newbie in UK

Hi to all from the UK south east coast, just bought an EVO VII RSII FQ300, got a few issues which I'll post up in the forums if you guys can help
Reply
Old Jun 17, 2012 | 02:57 AM
  #2  
HaVoC187's Avatar
Evolving Member
iTrader: (4)
 
Joined: Feb 2010
Posts: 231
Likes: 0
From: Belgium
Welcome on the board
I'm from Belgium myself. What issues are you having with the car?
Reply
Old Jun 17, 2012 | 09:04 AM
  #3  
Pezzar's Avatar
Thread Starter
Newbie
 
Joined: Jun 2012
Posts: 9
Likes: 0
From: Chichester
Originally Posted by HaVoC187
Welcome on the board
I'm from Belgium myself. What issues are you having with the car?
Hi thanks for the warm welcome.

The first issue I'm having is very similar to the guys in this thread. I have an annoying rattling sound that disappears when the clutch pedal is down or on deceleration. Aside this and more importantly, I'm sure it may be related, is the fact that if I drive along and put the car into 5th gear at anything below 3000rpm\80mph the whole vehicle judders. The car has been regularly maintained by an Evo specialist and has had a full service recently with full fluid changes. Last clutch done 20000 miles\3 years ago.

The second issue was how to remove the front bumper but I think I'm ok with that now

the third issue is regarding the fuel tank filler neck. Where it protrudes the metal is rusty and soft, can this be repaired easily?

Last edited by Pezzar; Jun 17, 2012 at 09:45 AM.
Reply
Old Jun 21, 2012 | 02:44 PM
  #4  
Pezzar's Avatar
Thread Starter
Newbie
 
Joined: Jun 2012
Posts: 9
Likes: 0
From: Chichester
anybody??
Reply
Old Jun 22, 2012 | 03:40 AM
  #5  
HaVoC187's Avatar
Evolving Member
iTrader: (4)
 
Joined: Feb 2010
Posts: 231
Likes: 0
From: Belgium
From going through that thread it's most likely the input shaft bearing, so I would start there.

Did you manage to take it off?

How bad is it? Can you take a pic?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dan-lincs
09+ Ralliart Engine/Turbo/Drivetrain
3
Jul 5, 2016 01:02 PM
SpnSprt
Evo General
3
Jan 2, 2007 08:40 PM
Roarin_8
Evo Electrical / Audio / Security
5
Jun 29, 2006 06:28 PM
neil2860
Vendor Service / Parts / Tuning Review
2
May 19, 2006 04:44 PM
SOUTHSIDEITALIA
Evo Show / Shine
10
Mar 6, 2005 11:18 PM




All times are GMT -7. The time now is 07:33 PM.