Notices
EvoM New Member / FAQs / EvoM Rules New member? Come on in, introduce yourself, and get acquainted with the evolutionm.net posse :) FAQs will also be answered in here.

What size is the stock mitsu gauges?

Thread Tools
 
Search this Thread
 
Old Mar 22, 2004 | 06:35 PM
  #1  
bbbwrx's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Aug 2003
Posts: 494
Likes: 0
From: SLC UTAH
Talking What size is the stock mitsu gauges?

I am trying to find out what size the gauges are in side the evo. These are the factory option gauges located under the EVAP system. If I had my car I would measure them but I don't have it yet.

Thanks,

BEN
Reply
Old Mar 22, 2004 | 06:42 PM
  #2  
SinCityEvo's Avatar
Evolved Member
iTrader: (3)
 
Joined: Sep 2003
Posts: 898
Likes: 0
From: Las Vegas
Just measured them. 1 3/4" diameter including the bezel ring. Pretty dam small but have worked fine. In fact, I have an a pillar boost gauge and both gauges are in synch with each other perfectly.

Last edited by SinCityEvo; Mar 22, 2004 at 06:44 PM.
Reply
Old Mar 22, 2004 | 06:45 PM
  #3  
bbbwrx's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Aug 2003
Posts: 494
Likes: 0
From: SLC UTAH
so i would need to find gauges that are a little smaller than that?
Reply
Old Mar 22, 2004 | 06:48 PM
  #4  
hbruce16's Avatar
Newbie
iTrader: (3)
 
Joined: Feb 2004
Posts: 78
Likes: 0
From: Chester, Virginia
Just got my SMK

I just got my Sport Meter Kit adn measured the bracket. The openings are 1 5/8" so I think 1.5" gauges should fit. I am not gonna use the boost gauge and replace it with a VDO mini oil pressure gauge cause i have an Apexi EL2 Boost gauge.
Reply
Old Mar 22, 2004 | 06:50 PM
  #5  
SinCityEvo's Avatar
Evolved Member
iTrader: (3)
 
Joined: Sep 2003
Posts: 898
Likes: 0
From: Las Vegas
The smallest gauges I have seen are 52 or 60 mm which are both bigger than stock. I relocated my stock gauges to the radio location and moved the radio down. Looks 100x better. do a search, there are many members who have aftermarket gauges in the stock radio location and you can fit 60 mm in there also.
Reply
Old Mar 22, 2004 | 06:53 PM
  #6  
bbbwrx's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Aug 2003
Posts: 494
Likes: 0
From: SLC UTAH
I wonder if you coould use omori 45mm gauges? they are 1 3/4" Maybe i could get my hands on one to check.
Reply
Old Mar 22, 2004 | 07:12 PM
  #7  
bbbwrx's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Aug 2003
Posts: 494
Likes: 0
From: SLC UTAH
the inner part of the gauge is 1 3/4 and the ring around it is 1 7/8. So i looks like this would be the best bet and easiest to fit in there.

BEN
Reply




All times are GMT -7. The time now is 09:15 AM.