Seibon Carbon is out for your Evo X, At the Best Deals!!!
Jul 16, 2008, 11:00 AM
#108
Newbie
iTrader: (2)
Join Date: Aug 2007
Location: Los Angeles, CA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
i did put it on 
only thing is, if you have a small wing, be prepared for drilling.
not a big deal but still you need to work on it.
Other wise the wing is awsome, and unbeatable for the money. Not to mention the factory price for the factory plastic wing... $1800..
The packaging was perfect, , fact one of the best packaging job i ever received.
now i just to have get rid of those unnecessary fog lights.
only thing is, if you have a small wing, be prepared for drilling.
not a big deal but still you need to work on it.
Other wise the wing is awsome, and unbeatable for the money. Not to mention the factory price for the factory plastic wing... $1800..
The packaging was perfect, , fact one of the best packaging job i ever received.
now i just to have get rid of those unnecessary fog lights.
Thanks,
Yovany
Jul 17, 2008, 05:48 AM
#110
All hardware is included. /screws/
To do a drilling it is easy. To remove the factory wing you need a hair dryer and one 10 mm wrench. Take off the 10 mm bolts ./each side 2/ then start heat up the side of the wing . Helpful if you have a credit card ready to help the glue come off from the trunk. Gently pull the wing when you do that. If your body help it is easier and more fun
.Put some blanket on the car to prevent scratches. Some polishing stuff will take off the remaining glue from the trunk.
1/ There is pre marked wholes on the side on the trunk /inside/. So it is easy and straight forward to do that. Do that one first.
Now to drill the inner whole which is a closest to the middle of the trunk is harder.
2/ I suggest put some tape on the whole, on the wing. only the inside one.
3/ then put some paint spot on, above the whole on the tape.
4/ Then line up the out side wholes with the wing wholes. its existed and you are drilled already
5/ Then you carefully and precise put the wing on.
6/ Wait a little ,then carefully /so you dont make a mess with the paint pointer on the trunk/ take
the wing off.
Now you are marked for the last whole. Drill it thru ,and you are ready to install.
I suggest to get some 3M double sided tape . Just before you will put the wing on put some 3M tape on it. Just like the factory wing have. For the better and stronger wing.
Jul 17, 2008, 09:56 AM
#112
Account Disabled
iTrader: (12)
Join Date: Oct 2007
Location: New Jersey
Posts: 2,335
Likes: 0
Received 0 Likes
on
0 Posts
Jeez is the Seibon rep on Vacation? Does he know you have an unsatisfied customer? It seriously cant be that hard to say "We plan to have this product ready in X amount of days".
.....sorry, I'm just still angry over the outcome of my purchase. I even took down the fitment pictures so it wouldn't hurt future sells, you figure they could give you some kind of info.
.....sorry, I'm just still angry over the outcome of my purchase. I even took down the fitment pictures so it wouldn't hurt future sells, you figure they could give you some kind of info.
Jul 17, 2008, 10:11 AM
#113
Newbie
iTrader: (2)
Join Date: Aug 2007
Location: Los Angeles, CA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the detailed info Robevo! Ill pretty much do what u did when my wing arrives =)
I'm glad I don't have to go hardware hunting.. Since seibon provies it!
Thanks again,
Yovany
I'm glad I don't have to go hardware hunting.. Since seibon provies it!
Thanks again,
Yovany
Jul 17, 2008, 04:26 PM
#116
Account Disabled
Thread Starter
iTrader: (142)
Join Date: Mar 2005
Location: NY
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
I pmed you, this time with my personal email address so you can stay in touch with me directly. Again, please contact me directly with any questions while we follow this through so that this thread may stay on topic for everyone else.
Chris @ CVR
Chris @ CVR
