AMS, Rexpeed, and APR Extrior Styling New at Mellon Racing
#1
Account Disabled
Thread Starter
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
AMS, Rexpeed, and APR Extrior Styling New at Mellon Racing
These products are only some of the many products we have... Check us out at: MellonRacing.com
We carry the full line of Rexpeed
Rexpeed Evo X Carbon Fiber J-Panels
Each J-panel comes with UV clear coat finish.
*These are not CF covers they are OEM J-panels from Mitsubishi wrapped in real carbon fiber.*
Install takes 2 minutes - pop off your old J-panel and snap the new CF J-panels in. Fits CZ4A models.
__________________________________________________ _______________
Rexpeed Evo X Carbon Fiber Hood Scoop
OEM Style Carbon Fiber Hood Scoop. Made from high quality 2x2 weave with clear coat finish. Gauranteed perfect fitment!
__________________________________________________ _______________
Rexpeed Evo X V-Style Carbon Side Spats - Non Aero Kit
Want to add more bling to your Evo X? These carbon side spats are made from the highest quality carbon fiver weave. Spats come with 3M ahesives and mounting hardware for easy 10 minute install. Made to fit Evo X with Non Aero kit only. Available in 1x1 weave only. Sold in pairs.
There are many more Rexpeed parts @ our site : http://www.mellonracing.com/index.ph...ex&cPath=18_46
__________________________________________________ _______________
AMS EVO X Carbon Fiber Roof
The AMS EVO X Carbon Fiber Roof adds good looks to your car and even allows you to retain the factory headliner. This incredible looking roof structural rigidity to your race car, style to your show car and is perfectly at home on your street car.v
Features
•Tested and proven on the record holding AMS Drag and Time Attack EVOs
•Foam core sandwiched in carbon fiber for strength and rigidity
•Allows for factory headliner
•Shaves 7lb. from the highest point of the car
Kit Includes
•AMS EVO Carbon Fiber Roof
Applications
•Mitsubishi Evolution 10 GSR & MR
•Fits all USDM, JDM and European Models
*Due to the product's size you will need to CALL IN FOR A SHIPPING QUOTE. If it is not in stock please allow up to three weeks for shipment.
AMS recommends professional installation by a qualified body shop.
When installing this roof on the EVO X you will need to replace the windshield molding. This part is available from Mitsubishi and can be purchased through us.
Check out the product @ : http://www.mellonracing.com/index.ph...roducts_id=590
__________________________________________________ _______________
AMS Evo X/ Ralliart Carbon Fiber Headlight Delete Covers
The AMS Evo X/ Ralliart Carbon Fiber Headlight Delete Covers are an AMS exclusive! Whether you want to protect your headlights for track days, reduce weight over the front axle or just look sleek at the show; these 100% carbon units will have your car looking its best. Replace your OEM headlights for a total weights savings of 15.6lbs!! These covers are completely reversible back to stock.
Features
•Safegaurd your expensive OEM headlights
•Save a total of 15.6lbs
•100% carbon fiber construction
Applications
•Mitsubishi Evolution 10 GSR & MR
•2009+ Mitsubishi Lancer Ralliart
•Fits all USDM, JDM and European Models
Check it out here @ : http://www.mellonracing.com/index.ph...roducts_id=593
__________________________________________________ _______________
APR Evo X Front Canards
APR Front Bumper Canards are the perfect answer to aerodynamically tune the handling for the front of a car. Made of lightweight and durable carbon graphite composites, APR Front Bumper Canards help increase front downforce at high speeds. The added downforce stabilizes the cars chassis during hard cornering and increases traction for faster lap times. Every APR Front Bumper Canards set includes 4 canards and screws & bolts to attach the canards to the front bumper. This will allow you to customize your cars front end downforce by either installing two flaps or creating maximum downforce with a full set of four canards.
Check out the product at : http://www.mellonracing.com/index.ph...roducts_id=387
There is much more at our site, you can check it out here : http://www.mellonracing.com/index.ph...ex&cPath=18_46
__________________________________________________ _______________
APR Front Splitter EVO 10
A Wind Splitter is a protruding flat surface in the front of a car that is designed to decrease front end lift and exert downforce. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Carbon by Design Carbon Fiber High Rise Spoiler EVO 10
2008 EVO X / Lancer Carbon Fiber High Rise Spoiler. If you are looking for a rear spoiler the really performs then look no further. Carbon by Design has added a more aggressive rake in the rear of the wing giving you more down force at moderate speeds. In addition to the increased rake, the Carbon by Design spoiler allows for a gurney strip to be mounted to the rear of the spoiler for additional down force. All mounting holes are drilled and taped making the install take less that 30 minutes.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Carbon by Design Carbon Fiber Trunk EVO 10
This 2008 EVO X Carbon Fiber Trunk is just what you car needs to give that competitive look. Carbon By Design has reduced the weight by 50%. Made with aerospace carbon fiber. For easy install, retain all stock mounting hardware.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Carbon by Design Carbon Fiber Hood EVO 10
This redesigned 2008 EVO X Carbon Fiber Hood is just what your car needs to give it that competitive look. Carbon By Design has re-shaped the center scoop so that more fresh air enters the engine bay by the turbo. Also, the side vents have been enlarged and deepened into the engine bay so that more of that hot air from the intercooler has a better chance of escaping. Remember, If your engine is running cooler you are making more power. Made with aerospace carbon fiber. Latch is fastened on hood for easy install, retains all stock mounting hardware.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
GReddy Gracer Front Lip Spoiler EVO 10
Front Spoilers are the first point to receive airflow resistance; the design of the front spoiler determines the final handling of the vehicle. The GRACER front spoilers are designed to reduce airflow going beneath the vehicle and also direct air to critical areas such as the radiator and intercooler.
While driving air turbulence occurs around the front tire, this turbulence can disturb airflow all the way to the back of the vehicle, where it can reduce the function of the rear spoiler.
TECH TIP: Direct bolt on! Lip comes prepared to be painted.
Fits: Mitsubishi Lancer X
PLEASE NOTE THIS ITEM DOES NOT INCLUDE FREE SHIPPING AS IT IS OVERSIZED. $100 WILL BE ADDED TO YOUR CART WHEN THIS IS ADDED
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
RallyArmor Polyurethane Mudflaps EVO 10
Rally Armor's premium UR (as in “you are”) series mud flaps for Mitsubishi EVO X help deflect paint damaging rocks, dust, mud, tar and debris.
Designed to directly bolt on (no drilling required), Rally Armor UR EVO X mud flaps are inherently impact and abrasion resistant. The UR mud flaps acclimate flexibly just as naturally in extreme weather conditions as moderate temperatures. In addition, the urethane mud flaps are lightweight and offer EVO X owners an enduring urethane mud flap with a direct fitment mounting solution that inclusively fits models with and without ground effects.
A set of Rally Armor UR mud flaps for EVO X includes 4 flaps for each corner of the vehicle and mounting hardware.
Fitment Note: Fits all EVO X models equipped with and without factory aero kit. Does NOT fit Lancer Ralliart. Please see 07+ Lancer flaps for Ralliart specific Lancers.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Rexpeed Carbon Fiber Intake EVO 10
Direct bolt on item replaces factory intake. Made from high grade twill weave carbon fiber. Works with our carbon radiator panel.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Rexpeed Carbon Fiber Pillar Trim EVO 10
Made from real carbon fiber comes in 6 pieces.
- Comes with 3M adhesive on back side
- Easy to install, no cutting is needed
- 100% Brand New
- High Quality Beautiful Carbon Weaves
- Kit includes 6 CF pillar trims
-Will not fall off when sprayed with pressure washer
Color: Black
Fits: Evo X (CZ4A) only
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Rexpeed Carbon Trunk Spoiler EVO 10
Evo X trunk spoiler is made from high quality carbon fiber with a clear coat finish. Kit includes 3M adhesives for easy installation. Made to fit with or without the factory wing. Great mod for those who want to go wingless anytime!
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Rexpeed V-Style Carbon Splitter EVO 10
Each lip is made from high quality carbon fiber with clear coat finish. Fitment is exactly what you see in the pics. Each individual carbon lip has been test fitted so our customers do not have to worry about fitment issues. Comes with all necessary hardware for a complete install. Available in 2x2 weave only.
Currently we are only shipping the splitters to USA, Canada, United Kingdom, Australia and Southeast Asia. If you are located in a different country please email us for a shipping quote.
You can check this product out at:
__________________________________________________ _______________
Side Window Deflectors EVO 10
Full set of 4 side window deflectors. Fits all 2008+ Lancer models.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
TiTek Innovations Carbon Fiber Hood Air Guide EVO 10
Titek is proud to announce our Carbon Fiber Hood Air Guide for the 2008 Lancer EVO X. This is a modified version of the factory one with a taller air guide and is made of high grade carbon fiber. This duct aids in allowing more air into the engine bay and also allowing for more heat to escape as your car cools down as its sitting. This does not obstruct the driver's view of the road and like all of Titek's products, the item looks good and highly functional. Installation is a direct replacement of the OEM one.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
SSP Aluminum Undertray Panel - EVO 10
After seeing no real solution for a proper under panel for the Evo X, we at South Side Performance took it upon our selves to come up with a solution.
No other under panel currently on the market offers the level of protection, and 100% coverage for the underside of the car. We have added extra louvers for added cooling benefits, while keeping the bottom as flat as possible for added aerodynamics benefits, and greater down force. We have also integrated access panels for easy oil filter and drain plug access. Our under panel bolts right up to the OEM fender liners and inner fender well so everything will be secure. And if that isn't enough for you we have done all this while still maintaining ALL factory holes and OEM bolt locations! There is NO cutting.....NO drilling.....and NO modifying!!
**Please note this item comes in powder coated satin black**
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Seibon TS Style Carbon Fiber Hood EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
We carry the full line of Rexpeed
Rexpeed Evo X Carbon Fiber J-Panels
Each J-panel comes with UV clear coat finish.
*These are not CF covers they are OEM J-panels from Mitsubishi wrapped in real carbon fiber.*
Install takes 2 minutes - pop off your old J-panel and snap the new CF J-panels in. Fits CZ4A models.
__________________________________________________ _______________
Rexpeed Evo X Carbon Fiber Hood Scoop
OEM Style Carbon Fiber Hood Scoop. Made from high quality 2x2 weave with clear coat finish. Gauranteed perfect fitment!
__________________________________________________ _______________
Rexpeed Evo X V-Style Carbon Side Spats - Non Aero Kit
Want to add more bling to your Evo X? These carbon side spats are made from the highest quality carbon fiver weave. Spats come with 3M ahesives and mounting hardware for easy 10 minute install. Made to fit Evo X with Non Aero kit only. Available in 1x1 weave only. Sold in pairs.
There are many more Rexpeed parts @ our site : http://www.mellonracing.com/index.ph...ex&cPath=18_46
__________________________________________________ _______________
AMS EVO X Carbon Fiber Roof
The AMS EVO X Carbon Fiber Roof adds good looks to your car and even allows you to retain the factory headliner. This incredible looking roof structural rigidity to your race car, style to your show car and is perfectly at home on your street car.v
Features
•Tested and proven on the record holding AMS Drag and Time Attack EVOs
•Foam core sandwiched in carbon fiber for strength and rigidity
•Allows for factory headliner
•Shaves 7lb. from the highest point of the car
Kit Includes
•AMS EVO Carbon Fiber Roof
Applications
•Mitsubishi Evolution 10 GSR & MR
•Fits all USDM, JDM and European Models
*Due to the product's size you will need to CALL IN FOR A SHIPPING QUOTE. If it is not in stock please allow up to three weeks for shipment.
AMS recommends professional installation by a qualified body shop.
When installing this roof on the EVO X you will need to replace the windshield molding. This part is available from Mitsubishi and can be purchased through us.
Check out the product @ : http://www.mellonracing.com/index.ph...roducts_id=590
__________________________________________________ _______________
AMS Evo X/ Ralliart Carbon Fiber Headlight Delete Covers
The AMS Evo X/ Ralliart Carbon Fiber Headlight Delete Covers are an AMS exclusive! Whether you want to protect your headlights for track days, reduce weight over the front axle or just look sleek at the show; these 100% carbon units will have your car looking its best. Replace your OEM headlights for a total weights savings of 15.6lbs!! These covers are completely reversible back to stock.
Features
•Safegaurd your expensive OEM headlights
•Save a total of 15.6lbs
•100% carbon fiber construction
Applications
•Mitsubishi Evolution 10 GSR & MR
•2009+ Mitsubishi Lancer Ralliart
•Fits all USDM, JDM and European Models
Check it out here @ : http://www.mellonracing.com/index.ph...roducts_id=593
__________________________________________________ _______________
APR Evo X Front Canards
APR Front Bumper Canards are the perfect answer to aerodynamically tune the handling for the front of a car. Made of lightweight and durable carbon graphite composites, APR Front Bumper Canards help increase front downforce at high speeds. The added downforce stabilizes the cars chassis during hard cornering and increases traction for faster lap times. Every APR Front Bumper Canards set includes 4 canards and screws & bolts to attach the canards to the front bumper. This will allow you to customize your cars front end downforce by either installing two flaps or creating maximum downforce with a full set of four canards.
Check out the product at : http://www.mellonracing.com/index.ph...roducts_id=387
There is much more at our site, you can check it out here : http://www.mellonracing.com/index.ph...ex&cPath=18_46
__________________________________________________ _______________
APR Front Splitter EVO 10
A Wind Splitter is a protruding flat surface in the front of a car that is designed to decrease front end lift and exert downforce. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Carbon by Design Carbon Fiber High Rise Spoiler EVO 10
2008 EVO X / Lancer Carbon Fiber High Rise Spoiler. If you are looking for a rear spoiler the really performs then look no further. Carbon by Design has added a more aggressive rake in the rear of the wing giving you more down force at moderate speeds. In addition to the increased rake, the Carbon by Design spoiler allows for a gurney strip to be mounted to the rear of the spoiler for additional down force. All mounting holes are drilled and taped making the install take less that 30 minutes.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Carbon by Design Carbon Fiber Trunk EVO 10
This 2008 EVO X Carbon Fiber Trunk is just what you car needs to give that competitive look. Carbon By Design has reduced the weight by 50%. Made with aerospace carbon fiber. For easy install, retain all stock mounting hardware.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Carbon by Design Carbon Fiber Hood EVO 10
This redesigned 2008 EVO X Carbon Fiber Hood is just what your car needs to give it that competitive look. Carbon By Design has re-shaped the center scoop so that more fresh air enters the engine bay by the turbo. Also, the side vents have been enlarged and deepened into the engine bay so that more of that hot air from the intercooler has a better chance of escaping. Remember, If your engine is running cooler you are making more power. Made with aerospace carbon fiber. Latch is fastened on hood for easy install, retains all stock mounting hardware.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
GReddy Gracer Front Lip Spoiler EVO 10
Front Spoilers are the first point to receive airflow resistance; the design of the front spoiler determines the final handling of the vehicle. The GRACER front spoilers are designed to reduce airflow going beneath the vehicle and also direct air to critical areas such as the radiator and intercooler.
While driving air turbulence occurs around the front tire, this turbulence can disturb airflow all the way to the back of the vehicle, where it can reduce the function of the rear spoiler.
TECH TIP: Direct bolt on! Lip comes prepared to be painted.
Fits: Mitsubishi Lancer X
PLEASE NOTE THIS ITEM DOES NOT INCLUDE FREE SHIPPING AS IT IS OVERSIZED. $100 WILL BE ADDED TO YOUR CART WHEN THIS IS ADDED
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
RallyArmor Polyurethane Mudflaps EVO 10
Rally Armor's premium UR (as in “you are”) series mud flaps for Mitsubishi EVO X help deflect paint damaging rocks, dust, mud, tar and debris.
Designed to directly bolt on (no drilling required), Rally Armor UR EVO X mud flaps are inherently impact and abrasion resistant. The UR mud flaps acclimate flexibly just as naturally in extreme weather conditions as moderate temperatures. In addition, the urethane mud flaps are lightweight and offer EVO X owners an enduring urethane mud flap with a direct fitment mounting solution that inclusively fits models with and without ground effects.
A set of Rally Armor UR mud flaps for EVO X includes 4 flaps for each corner of the vehicle and mounting hardware.
Fitment Note: Fits all EVO X models equipped with and without factory aero kit. Does NOT fit Lancer Ralliart. Please see 07+ Lancer flaps for Ralliart specific Lancers.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Rexpeed Carbon Fiber Intake EVO 10
Direct bolt on item replaces factory intake. Made from high grade twill weave carbon fiber. Works with our carbon radiator panel.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Rexpeed Carbon Fiber Pillar Trim EVO 10
Made from real carbon fiber comes in 6 pieces.
- Comes with 3M adhesive on back side
- Easy to install, no cutting is needed
- 100% Brand New
- High Quality Beautiful Carbon Weaves
- Kit includes 6 CF pillar trims
-Will not fall off when sprayed with pressure washer
Color: Black
Fits: Evo X (CZ4A) only
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Rexpeed Carbon Trunk Spoiler EVO 10
Evo X trunk spoiler is made from high quality carbon fiber with a clear coat finish. Kit includes 3M adhesives for easy installation. Made to fit with or without the factory wing. Great mod for those who want to go wingless anytime!
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Rexpeed V-Style Carbon Splitter EVO 10
Each lip is made from high quality carbon fiber with clear coat finish. Fitment is exactly what you see in the pics. Each individual carbon lip has been test fitted so our customers do not have to worry about fitment issues. Comes with all necessary hardware for a complete install. Available in 2x2 weave only.
Currently we are only shipping the splitters to USA, Canada, United Kingdom, Australia and Southeast Asia. If you are located in a different country please email us for a shipping quote.
You can check this product out at:
__________________________________________________ _______________
Side Window Deflectors EVO 10
Full set of 4 side window deflectors. Fits all 2008+ Lancer models.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
TiTek Innovations Carbon Fiber Hood Air Guide EVO 10
Titek is proud to announce our Carbon Fiber Hood Air Guide for the 2008 Lancer EVO X. This is a modified version of the factory one with a taller air guide and is made of high grade carbon fiber. This duct aids in allowing more air into the engine bay and also allowing for more heat to escape as your car cools down as its sitting. This does not obstruct the driver's view of the road and like all of Titek's products, the item looks good and highly functional. Installation is a direct replacement of the OEM one.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
SSP Aluminum Undertray Panel - EVO 10
After seeing no real solution for a proper under panel for the Evo X, we at South Side Performance took it upon our selves to come up with a solution.
No other under panel currently on the market offers the level of protection, and 100% coverage for the underside of the car. We have added extra louvers for added cooling benefits, while keeping the bottom as flat as possible for added aerodynamics benefits, and greater down force. We have also integrated access panels for easy oil filter and drain plug access. Our under panel bolts right up to the OEM fender liners and inner fender well so everything will be secure. And if that isn't enough for you we have done all this while still maintaining ALL factory holes and OEM bolt locations! There is NO cutting.....NO drilling.....and NO modifying!!
**Please note this item comes in powder coated satin black**
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Seibon TS Style Carbon Fiber Hood EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM.
You can check this product out at:http://www.mellonracing.com/index.ph...c47071894fca91
__________________________________________________ _______________
Last edited by Mellon Racing; Oct 23, 2012 at 03:29 PM.
#3
Account Disabled
Thread Starter
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
Beatrush License Plate Holder EVO 10
Beatrush License Plate Holder Mitsubishi Evolution EVO X
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Beatrush License Plate Holder Mitsubishi Evolution EVO X
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Last edited by Mellon Racing; Jul 21, 2012 at 10:04 AM.
#4
Account Disabled
Thread Starter
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
Seibon Carbon Fiber Hood EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Fenders 10mm wider EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Front Lip EVO 10
SEIBON Carbon Fiber Front Lips are designed to replace your factory lip (if equipped) or be added to your stock front end for a subtle and stylish look. In addition, many front lips add additional air ducting and down force to the front of your vehicle for added performance.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
All SEIBON Carbon Fiber Products are:
Hand Laid
‘Wet’ Carbon Fiber
Clear ‘Gel’ Coated from the Factory
Inspected Before Shipping
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Rear Diffuser EVO 10
SEIBON Carbon Fiber Rear Diffusers are designed to add down force and look great on your vehicle. Protect your underbody and increase performance with SEIBON Carbon Fiber Rear Diffusers.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
All SEIBON Carbon Fiber Products are:
Hand Laid
‘Wet’ Carbon Fiber
Clear ‘Gel’ Coated from the Factory
Inspected Before Shipping
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Rear Doors EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Rear Lip EVO 10
SEIBON Carbon Fiber Rear Lips are designed to replace your factory lip (if equipped) or be added to your stock rear bumper for a subtle and stylish look. In addition, many rear lips add additional air ducting and down force to your vehicle for added performance.
All SEIBON Carbon Fiber Products are:
Hand Laid
‘Wet’ Carbon Fiber
Clear ‘Gel’ Coated from the Factory
Inspected Before Shipping
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Side Skirts EVO 10
SEIBON Carbon Fiber Side Skirts are designed to replace your factory side skirts (if equipped) or be added to your stock fenders and body for a subtle and stylish look. In addition, many side skirts add additional air ducting and the appearance that your vehicle is lower then it actually is, for that visual kick.
All SEIBON Carbon Fiber Products are:
Hand Laid
‘Wet’ Carbon Fiber
Clear ‘Gel’ Coated from the Factory
Inspected Before Shipping
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Spoiler EVO 10
SEIBON Carbon Fiber Rear Spoilers are designed to replace your factory rear spoiler, or add style to an otherwise empty trunk lid.
All SEIBON Carbon Fiber Products are:
Hand Laid
‘Wet’ Carbon Fiber
Clear ‘Gel’ Coated from the Factory
Inspected Before Shipping
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Trunk EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon TS Style Carbon Fiber Hood EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Fenders 10mm wider EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Front Lip EVO 10
SEIBON Carbon Fiber Front Lips are designed to replace your factory lip (if equipped) or be added to your stock front end for a subtle and stylish look. In addition, many front lips add additional air ducting and down force to the front of your vehicle for added performance.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
All SEIBON Carbon Fiber Products are:
Hand Laid
‘Wet’ Carbon Fiber
Clear ‘Gel’ Coated from the Factory
Inspected Before Shipping
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Rear Diffuser EVO 10
SEIBON Carbon Fiber Rear Diffusers are designed to add down force and look great on your vehicle. Protect your underbody and increase performance with SEIBON Carbon Fiber Rear Diffusers.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
All SEIBON Carbon Fiber Products are:
Hand Laid
‘Wet’ Carbon Fiber
Clear ‘Gel’ Coated from the Factory
Inspected Before Shipping
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Rear Doors EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Rear Lip EVO 10
SEIBON Carbon Fiber Rear Lips are designed to replace your factory lip (if equipped) or be added to your stock rear bumper for a subtle and stylish look. In addition, many rear lips add additional air ducting and down force to your vehicle for added performance.
All SEIBON Carbon Fiber Products are:
Hand Laid
‘Wet’ Carbon Fiber
Clear ‘Gel’ Coated from the Factory
Inspected Before Shipping
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Side Skirts EVO 10
SEIBON Carbon Fiber Side Skirts are designed to replace your factory side skirts (if equipped) or be added to your stock fenders and body for a subtle and stylish look. In addition, many side skirts add additional air ducting and the appearance that your vehicle is lower then it actually is, for that visual kick.
All SEIBON Carbon Fiber Products are:
Hand Laid
‘Wet’ Carbon Fiber
Clear ‘Gel’ Coated from the Factory
Inspected Before Shipping
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Spoiler EVO 10
SEIBON Carbon Fiber Rear Spoilers are designed to replace your factory rear spoiler, or add style to an otherwise empty trunk lid.
All SEIBON Carbon Fiber Products are:
Hand Laid
‘Wet’ Carbon Fiber
Clear ‘Gel’ Coated from the Factory
Inspected Before Shipping
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon Carbon Fiber Trunk EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Seibon TS Style Carbon Fiber Hood EVO 10
Seibon Carbon's carbon fiber body components for the 08-10 Evolution X are among the best carbon fiber body parts money can buy. All Seibon Carbon products are made using one-piece carbon sheet, for a clean looking component without broken lines or mismatched patterns. Seibon Carbon finishes all of these components with a clear coat finish resulting in a great "wet" looking shine and durable finish that you don't get from other brands that use a gel-coat finish. All Seibon carbon sheets are built into a mold made from an OEM component, so they do not break and split like the ones where carbon is only wrapped around the skeleton. Seibon Carbon's molding process also results in a carbon fiber body panel that has an excellent fit.
Seibon carbon fiber hoods are not 100% carbon fiber. Because carbon fiber material is just a piece of cloth you can't make any shape out of it without some kind of support. Seibon Carbon uses fiberglass backing to construct the skeleton.
Seibon Carbon has a 6-month limited clear coat warranty, and they guarantee fitment for all USDM vehicles that have not had any bodywork done. Seibon carbon test fits all parts before they make them available for sale, but customers need to understand that no after-market body parts will fit exactly like OEM. As a precaution, test fit all parts before you cut/paint/drill the items. It is considered normal to do minor adjustments for a good fit.
All Seibon Carbon carbon fiber parts are examined and double-boxed before shipping. Due to the sizes of most items, handling can be awkward, and sometimes the shipping company's freight handlers do not handle items carefully. You must examine the product's condition upon before signing the receipt. In case of shipping damage, please note any damages on the delivery receipt then accept the package and contact Seibon Carbon or us. Do not refuse the packages! If you sign for a Seibon Carbon component and later discovers damages, you might not get compensated properly, if at all.
NOTICE THIS ITEM IS NOT FREE SHIPPING AN EXTRA $100 WILL BE ADDED FOR SHIPPING OF THIS OVERSIZED ITEM
You can check it out at:http://www.mellonracing.com/index.ph...375f012a897679
__________________________________________________ _______
Last edited by Mellon Racing; Jul 21, 2012 at 09:42 AM.