Snow Performance Methanol Injection Kits for your X...
Thread Starter
Account Disabled
iTrader: (122)
Joined: Apr 2005
Posts: 6,876
Likes: 0
From: Peekskill NY
Snow Performance Methanol Injection Kits for your X...
All Boost Cooler® Kits Now Covered By A Lifetime Warranty!
CLICK HERE FOR OUR EBAY STORE
Snow Performance's commitment to providing the industry’s best water/methanol injection systems is now backed by a comprehensive Lifetime Warranty!
Snow Performance - The Water/Methanol Injection Experts™ - has engineered the highest level of quality and robustness into its products for many years. This unwavering quality is a result of tireless product development and extensive vehicle testing. With product quality that surpasses all industry standards, Snow Performance can confidently stand behind its products and offer a Lifetime Warranty.
The Lifetime Warranty will protect against all manufacturing defects throughout the life of all Snow Performance Boost Cooler® kits. This warranty applies to the original purchaser only on kits purchased after January 1, 2008. A Warranty Card must be on file with Snow Performance in order to honor the Lifetime Warranty. While Boost Juice is still recommended as your exclusive injection fluid, it is no longer required to honor this new warranty.
All individually purchased items, including upgrade options and separately purchased parts, are now covered under a two year warranty. Boost Cooler® kits that do not have the required Warranty Card on file with Snow Performance will still be covered by this two year warranty.
Don’t risk using an inferior water/methanol injection system. Stick with Snow Performance – The Water/Methanol Injection Experts™ - and enjoy GUARANTEED high quality systems from the industry leader!
Run higher boost with pump gas with the Snow Performance Alcohol/Water/Methanol Injection Kit! Alcohol/Water/Methanol Injection suppresses detonation so more power producing boost and timing can be utilized. Water, with its high latent heat of vaporization cools the intake charge and combustion. Methanol cools the charge and combustion but also acts like an extremely high octane fuel (some researchers claim as high as 120 octane) as well as adding more oxygen to combustion.This kit includes everything that you need to install this setup on your EVO, WRX, STi or SRT-4. This kit comes with a 2qt tank but can also be used with your stock winshield washer tank! This kit includes a 150psi shurflo pump which can spray methanol, alcohol, windshield fluid, or a mix. This kit has the several different controllers to choose from; either map, maf or 2d with maf and map. The kits can also be upgraded to include SafeInjection which is a failsafe that is used to kill boost down to wastegate pressure whenever an error in flow is detected with the system.
Shipping for any orders under $100 is $12.00 and any orders over $100 is $18.00. All kits come with 10ft of hose but if you are planning on doing a trunk install please let me know so I can send the proper amount. All payments are done through paypal via dan@ultimate-cc.com. Also I guarantee the lowest prices and the best customer service around on snow performance products...
FALL SALE, best deals ever...please inquire via pms...
Boost Cooler Stage 1: PM for pricing
Boost Cooler Stage 2(map, maf or 2d): PM for pricing
Boost Coller Stage3: PM for pricing
SafeInjection:PM for pricing
Safeinjection Solenoid: PM for pricing
Low Level Indicator: PM for pricing
Digital Injection Gauge: PM for pricing
VC-100 Upgrade: PM for pricing
Solenoid Upgrade: PM for pricing
2.5 Gallon Tank: PM for pricing
Nozzle Mounting Adaptor: PM for pricing
Nozzle Mounting Bung: PM for pricing
Optional Materials Needed:
Loctite or Threadlocker (needed for nozzle install)
Additional Vacum Line (depends where you install controller, some cases you may need additional line)
Switch (if you don’t want to have the alky kit on 24/7 you will need a switch to turn it on and off)
Gas Tank (to store or transport extra fluid)
Shrink Wrap (if you don’t want to use electrical tape)
Wire (depends on where you mount the controllers)
Here are a few pics of the kit installed on a EVO
Using OEM windshiled washer tank
Controllers mounted on passanger side floor
Tank and pump installed
Power led and warning led
Here are a few pics of the kit installed on a Legacy GT
Using OEM windshiled washer tank
VC25 controller mounted
Pump installed
Safeinjection installed
Power led and warning led
For more pictures of the kit please click here
CLICK HERE FOR OUR EBAY STORE
Snow Performance's commitment to providing the industry’s best water/methanol injection systems is now backed by a comprehensive Lifetime Warranty!
Snow Performance - The Water/Methanol Injection Experts™ - has engineered the highest level of quality and robustness into its products for many years. This unwavering quality is a result of tireless product development and extensive vehicle testing. With product quality that surpasses all industry standards, Snow Performance can confidently stand behind its products and offer a Lifetime Warranty.
The Lifetime Warranty will protect against all manufacturing defects throughout the life of all Snow Performance Boost Cooler® kits. This warranty applies to the original purchaser only on kits purchased after January 1, 2008. A Warranty Card must be on file with Snow Performance in order to honor the Lifetime Warranty. While Boost Juice is still recommended as your exclusive injection fluid, it is no longer required to honor this new warranty.
All individually purchased items, including upgrade options and separately purchased parts, are now covered under a two year warranty. Boost Cooler® kits that do not have the required Warranty Card on file with Snow Performance will still be covered by this two year warranty.
Don’t risk using an inferior water/methanol injection system. Stick with Snow Performance – The Water/Methanol Injection Experts™ - and enjoy GUARANTEED high quality systems from the industry leader!
Run higher boost with pump gas with the Snow Performance Alcohol/Water/Methanol Injection Kit! Alcohol/Water/Methanol Injection suppresses detonation so more power producing boost and timing can be utilized. Water, with its high latent heat of vaporization cools the intake charge and combustion. Methanol cools the charge and combustion but also acts like an extremely high octane fuel (some researchers claim as high as 120 octane) as well as adding more oxygen to combustion.This kit includes everything that you need to install this setup on your EVO, WRX, STi or SRT-4. This kit comes with a 2qt tank but can also be used with your stock winshield washer tank! This kit includes a 150psi shurflo pump which can spray methanol, alcohol, windshield fluid, or a mix. This kit has the several different controllers to choose from; either map, maf or 2d with maf and map. The kits can also be upgraded to include SafeInjection which is a failsafe that is used to kill boost down to wastegate pressure whenever an error in flow is detected with the system.
Shipping for any orders under $100 is $12.00 and any orders over $100 is $18.00. All kits come with 10ft of hose but if you are planning on doing a trunk install please let me know so I can send the proper amount. All payments are done through paypal via dan@ultimate-cc.com. Also I guarantee the lowest prices and the best customer service around on snow performance products...
FALL SALE, best deals ever...please inquire via pms...
Boost Cooler Stage 1: PM for pricing
Boost Cooler Stage 2(map, maf or 2d): PM for pricing
Boost Coller Stage3: PM for pricing
SafeInjection:PM for pricing
Safeinjection Solenoid: PM for pricing
Low Level Indicator: PM for pricing
Digital Injection Gauge: PM for pricing
VC-100 Upgrade: PM for pricing
Solenoid Upgrade: PM for pricing
2.5 Gallon Tank: PM for pricing
Nozzle Mounting Adaptor: PM for pricing
Nozzle Mounting Bung: PM for pricing
Optional Materials Needed:
Loctite or Threadlocker (needed for nozzle install)
Additional Vacum Line (depends where you install controller, some cases you may need additional line)
Switch (if you don’t want to have the alky kit on 24/7 you will need a switch to turn it on and off)
Gas Tank (to store or transport extra fluid)
Shrink Wrap (if you don’t want to use electrical tape)
Wire (depends on where you mount the controllers)
Here are a few pics of the kit installed on a EVO
Using OEM windshiled washer tank
Controllers mounted on passanger side floor
Tank and pump installed
Power led and warning led
Here are a few pics of the kit installed on a Legacy GT
Using OEM windshiled washer tank
VC25 controller mounted
Pump installed
Safeinjection installed
Power led and warning led
For more pictures of the kit please click here
Last edited by Ultimate CC; Dec 7, 2008 at 04:29 PM.
Thread Starter
Account Disabled
iTrader: (122)
Joined: Apr 2005
Posts: 6,876
Likes: 0
From: Peekskill NY
SafeInjection™
Available Again! New Improved SafeInjection™- boost/timing reduction system for use with the Boost Cooler® water/methanol injection system promises to revolutionize the industry by providing for safety even with the most aggressive tunes.
The net result of much development and a complete redesign, the new, improved design answers the call for more features and reliability. For years, many have wanted to use water/methanol injection but have not taken advantage of the power increases do to safety concerns. Designed as an add-on to the Boost Cooler® water/methanol injection system, SafeInjection™ allows for a safe tune in those instances where no injection is present and an aggressive tune is utilized. “Water/methanol injection is great and our systems are engineered for reliability, but in the case where you run out of fluid with an aggressive tune, many want the peace of mind that this system provides.” says Matt Snow of Snow Performance. The new and improved unit has these important features:
1. Fully adjustable alarm set point with new electronics for versatility.
2. Retard Timing- detailed instructions on integrating with our MSD, J&S Safeguard, & other popular aftermarket ignitions.
3. Optional Solenoids to open waste gates or bypass valves to reduce boost.
4. Faster response time and can display real time flow in ml/min (with optional gauge or stage-3G LCD screen).
5. Overflow alarm for leak detection.
6. Completely new internals for robustness and higher function
Benefits:
• Ability to run extreme tunes and high boost with safety.
• Automatically reduces boost or timing if fluid flow insufficient.
• Easy installation.
Be sure and check out the available flow-gauges and wastegate and bypass valve solenoids!
Available Again! New Improved SafeInjection™- boost/timing reduction system for use with the Boost Cooler® water/methanol injection system promises to revolutionize the industry by providing for safety even with the most aggressive tunes.
The net result of much development and a complete redesign, the new, improved design answers the call for more features and reliability. For years, many have wanted to use water/methanol injection but have not taken advantage of the power increases do to safety concerns. Designed as an add-on to the Boost Cooler® water/methanol injection system, SafeInjection™ allows for a safe tune in those instances where no injection is present and an aggressive tune is utilized. “Water/methanol injection is great and our systems are engineered for reliability, but in the case where you run out of fluid with an aggressive tune, many want the peace of mind that this system provides.” says Matt Snow of Snow Performance. The new and improved unit has these important features:
1. Fully adjustable alarm set point with new electronics for versatility.
2. Retard Timing- detailed instructions on integrating with our MSD, J&S Safeguard, & other popular aftermarket ignitions.
3. Optional Solenoids to open waste gates or bypass valves to reduce boost.
4. Faster response time and can display real time flow in ml/min (with optional gauge or stage-3G LCD screen).
5. Overflow alarm for leak detection.
6. Completely new internals for robustness and higher function
Benefits:
• Ability to run extreme tunes and high boost with safety.
• Automatically reduces boost or timing if fluid flow insufficient.
• Easy installation.
Be sure and check out the available flow-gauges and wastegate and bypass valve solenoids!
Thread Starter
Account Disabled
iTrader: (122)
Joined: Apr 2005
Posts: 6,876
Likes: 0
From: Peekskill NY
Snow Performance is announcing the debut of the ultimate in water-methanol injection systems for gasoline engines.
The Gasoline MPG MAX™ and the Gasoline Stage 3 systems are the most advanced, and yet, easiest to use and dial in systems available.
1. 3 Dimensional Mapping. Amazing accuracy and flexibility.
2. LCD Screen displaying Boost, Fuel Injector Pulse Width, and Water-Methanol Injection %
3. Pushbutton adjustment and tuning
4. Ability to accurately inject in all load states - from very light throttle to full load, wide open throttle.
The Gasoline Stage 3 Boost Cooler® and Gasoline MPG MAX™ from Snow Performance, the Water-Methanol Injection Experts™. Available on or before December 1, 2008.
Stay tuned for more updates!
The Gasoline MPG MAX™ and the Gasoline Stage 3 systems are the most advanced, and yet, easiest to use and dial in systems available.
1. 3 Dimensional Mapping. Amazing accuracy and flexibility.
2. LCD Screen displaying Boost, Fuel Injector Pulse Width, and Water-Methanol Injection %
3. Pushbutton adjustment and tuning
4. Ability to accurately inject in all load states - from very light throttle to full load, wide open throttle.
The Gasoline Stage 3 Boost Cooler® and Gasoline MPG MAX™ from Snow Performance, the Water-Methanol Injection Experts™. Available on or before December 1, 2008.
Stay tuned for more updates!
Trending Topics
Thread Starter
Account Disabled
iTrader: (122)
Joined: Apr 2005
Posts: 6,876
Likes: 0
From: Peekskill NY
The Stage 3 Boost Cooler is unmatched for accuracy and adjustability. This system can be used on ANY EFI engine naturally aspirated or forced induction, and any forced induction application.
It can read and inject according to either EFI Fuel Injector Pulse-width or Boost level, or any combination of BOTH!
Extremely easy to set up and dial in - the software creates a 3 dimensional delivery map from just a few easy to set start and full points you punch in.
The LCD Screen displays boost pressure, Injector Pulse width %, as well as water-methanol injection percent. Quick, easy, positive adjustments are made with 2 push buttons. Low profile design allows for easy-to-view and discrete mounting.
Kit includes:
• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• LCD Screen, Pushbutton Digital Variable 3D Mapping Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• 10 feet High Pressure Tubing (1200psi burst)
• Comprehensive Instructions
• Comprehensive Instructions
• All Required Hardware Needed For Installation
• Comprehensive Instructions
It can read and inject according to either EFI Fuel Injector Pulse-width or Boost level, or any combination of BOTH!
Extremely easy to set up and dial in - the software creates a 3 dimensional delivery map from just a few easy to set start and full points you punch in.
The LCD Screen displays boost pressure, Injector Pulse width %, as well as water-methanol injection percent. Quick, easy, positive adjustments are made with 2 push buttons. Low profile design allows for easy-to-view and discrete mounting.
Kit includes:
• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• LCD Screen, Pushbutton Digital Variable 3D Mapping Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• 10 feet High Pressure Tubing (1200psi burst)
• Comprehensive Instructions
• Comprehensive Instructions
• All Required Hardware Needed For Installation
• Comprehensive Instructions