Cobb Cat Backs, HKS Parts
Oct 2, 2009, 12:55 PM
#1
Cobb Cat Backs, HKS Parts
Cobb Tuning Cat Back - 1,195.00 Shipped!!!! CLICK TO ORDER!!!
Video:
http://www.youtube.com/watch?v=lJU0WyFGT9k
Significant attention was devoted to the packaging of this exhaust. Tubing diameter was increased to 3" and bends were kept to a minimum with large radii for optimum flow characteristics. Fitment was extensively worked to ensure maximum ground clearance to accommodate cars with very low ride heights. Designed as a direct replacement for the factory cat back exhaust, it uses all of the stock mounting points and is compatible with the factory cat pipe as well as the previously released COBB High Flow Cat Pipe.
The unique muffler in this exhaust is custom designed for this application and features an internal "Y" to provide maximum straight through flow from a transversely mounted muffler. This design allows much higher flow rates than typical EVO X chambered transverse mufflers which significantly increase backpressure and limit total power output.
Potent performance need not attract the attention of over-zealous law enforcement. Despite the superior flow characteristics of the COBB EVO X Cat Back exhaust, it still conforms to strict SAE sound emission requirements of 95 decibels, even when paired with the COBB EVO X Downpipe and COBB EVO X Cat Pipe. The twin oval tips are positioned to mimic the factory set-up and follow the lines of the rear bumper cover, giving a purposeful yet subtle look.
The COBB Limited Edition 3" SS Cat Back Exhaust for the EVO X offers unmatched performance, OEM fitment, innovative engineering, outstanding craftsmanship and 50-state legal sound compliance.
HKS Evo X Downpipe - 239.20 Shipped CALL OR PM TO ORDER EVOM PRICING ONLY!!!
For maximum exhaust flow and quicker turbo spool up, HKS offers downpipes for racing use. Each mandrel bent down pipe is a bolt-on application that will mount to the stock turbo and/or to a HKS turbo upgrade kit. All HKS down pipes are FOR OFF ROAD USE ONLY. 65MM Piping Diameter. Made out of SUS304 Stainless. Fits the Mitsubishi EVO X MR & GSR, also the 09+ Ralliart.
HKS Rear Bumper Protectors - 280 Shipped CALL OR PM TO ORDER EVOM PRICING ONLY!!!
Keep the bumper on your new Mitsubishi EVO X new! The HKS Exhaust heat shields will help protect and keep your bumper from discoloring from the heat of the exhaust. Also ads a nice touch to the back end of the veichle. This will fit the Evo GSR and MR 08+
HKS Premium Suction Kit - 348.00 Shipped CALL OR PM TO ORDER EVOM PRICING ONLY!!!
The HKS Premium Line of Suction kits are for those who want maximum performance out of their intake system, but do not want to change any of the intake characteristics. This particular kit keeps the factory air box, replaces the factory air filter with a high flow foam filter, and replaces the factory plastic intake pipe with a hard pipe. Will fit the EVO X GSR and MR 08+
HKS Evo X Hi-Power Exhaust - 733.50 Shipped CLICK HERE TO ORDER!!
Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path.
For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Hi-Power muffler tips 115mm in diameter, piping diameter is 75mm.
Invidia Evolution VIII Turbo outlet- 249.99 ShippedCLICK TO ORDER!!!
This turbo outlet will remove the turbo outlet allowing your turbo to flow exhaust gasses more efficiently. Is a direct bolt in for the EVO. Will work with factory exhaust as well as any exhaust that would keep the factory Turbo outlet and stock donut gasket. And is constructed of fully polished 304 stainless steel.
Invidia Evolution VIII Downpipe- 237.99 ShippedCLICK TO ORDER!!!
Prices only good while supplies last so please hurry!!!
Video:
http://www.youtube.com/watch?v=lJU0WyFGT9k
Significant attention was devoted to the packaging of this exhaust. Tubing diameter was increased to 3" and bends were kept to a minimum with large radii for optimum flow characteristics. Fitment was extensively worked to ensure maximum ground clearance to accommodate cars with very low ride heights. Designed as a direct replacement for the factory cat back exhaust, it uses all of the stock mounting points and is compatible with the factory cat pipe as well as the previously released COBB High Flow Cat Pipe.
The unique muffler in this exhaust is custom designed for this application and features an internal "Y" to provide maximum straight through flow from a transversely mounted muffler. This design allows much higher flow rates than typical EVO X chambered transverse mufflers which significantly increase backpressure and limit total power output.
Potent performance need not attract the attention of over-zealous law enforcement. Despite the superior flow characteristics of the COBB EVO X Cat Back exhaust, it still conforms to strict SAE sound emission requirements of 95 decibels, even when paired with the COBB EVO X Downpipe and COBB EVO X Cat Pipe. The twin oval tips are positioned to mimic the factory set-up and follow the lines of the rear bumper cover, giving a purposeful yet subtle look.
The COBB Limited Edition 3" SS Cat Back Exhaust for the EVO X offers unmatched performance, OEM fitment, innovative engineering, outstanding craftsmanship and 50-state legal sound compliance.
HKS Evo X Downpipe - 239.20 Shipped CALL OR PM TO ORDER EVOM PRICING ONLY!!!
For maximum exhaust flow and quicker turbo spool up, HKS offers downpipes for racing use. Each mandrel bent down pipe is a bolt-on application that will mount to the stock turbo and/or to a HKS turbo upgrade kit. All HKS down pipes are FOR OFF ROAD USE ONLY. 65MM Piping Diameter. Made out of SUS304 Stainless. Fits the Mitsubishi EVO X MR & GSR, also the 09+ Ralliart.
HKS Rear Bumper Protectors - 280 Shipped CALL OR PM TO ORDER EVOM PRICING ONLY!!!
Keep the bumper on your new Mitsubishi EVO X new! The HKS Exhaust heat shields will help protect and keep your bumper from discoloring from the heat of the exhaust. Also ads a nice touch to the back end of the veichle. This will fit the Evo GSR and MR 08+
HKS Premium Suction Kit - 348.00 Shipped CALL OR PM TO ORDER EVOM PRICING ONLY!!!
The HKS Premium Line of Suction kits are for those who want maximum performance out of their intake system, but do not want to change any of the intake characteristics. This particular kit keeps the factory air box, replaces the factory air filter with a high flow foam filter, and replaces the factory plastic intake pipe with a hard pipe. Will fit the EVO X GSR and MR 08+
HKS Evo X Hi-Power Exhaust - 733.50 Shipped CLICK HERE TO ORDER!!
Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path.
For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Hi-Power muffler tips 115mm in diameter, piping diameter is 75mm.
Invidia Evolution VIII Turbo outlet- 249.99 ShippedCLICK TO ORDER!!!
This turbo outlet will remove the turbo outlet allowing your turbo to flow exhaust gasses more efficiently. Is a direct bolt in for the EVO. Will work with factory exhaust as well as any exhaust that would keep the factory Turbo outlet and stock donut gasket. And is constructed of fully polished 304 stainless steel.
Invidia Evolution VIII Downpipe- 237.99 ShippedCLICK TO ORDER!!!
Prices only good while supplies last so please hurry!!!
Last edited by RallySport Direct; Oct 31, 2009 at 09:53 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
RallySport Direct
EvoX 'For Sale' External Engine / Power
62
Aug 4, 2017 03:32 PM
RallySport Direct
EvoX 'For Sale' External Engine / Power
4
Dec 7, 2009 09:22 PM
RallySport Direct
Evo 'For Sale' External Engine / Power
11
Aug 12, 2006 08:44 PM
