I have a 57 trim kit waitingto be put on, im going to be running 93oct with an aquamist 100% meth kit... im looking for right around 500whp

stock ecu, bc 272 cams, arp head/rod bolts, ebay clone fmic for now until i end up getting your 3.5 fmic,, walbro 255, br short route uicp, rsr tbe, test pipe, aem uego wideband

what injectors?? 780s 880s"?? more or less

 

780s should be fine. That's what I run with my AMS 50 trim.

 

I run 880s.

 

Why not just go with 1000's and have some headroom?

Bryan

 

alot of people are telling me no more than 780s on a stock ecu

 

Lot of people are running 1000's on stock ECU--- not a problem if you have a competent tuner.

I'd run 880's for your setup though. 780's would be sufficient, but I'd give some headroom incase you go bigger in the future.

 

With the turbo you will be running and the fact you'll be running meth., 780s are perfect. There really isn't any reason to go bigger.

 

I'd suggest 1000cc injectors as well because they don't cost any more than the smaller ones and will prevent you having to upgrade your upgrade again later. Those would assure that you'll have plenty of fuel to max out that turbocharger on race gas and get a long way on E85 if your plans ever deviate from pump+meth.

Tom