not sure on plans to release evo 8 SM4 PnP, but i have done two and can make the proper harness for plug and play.

 

Any updates on the Evo9 pnp board? Has anyone tuned one with the Mivec?

 

Want to understand more on Autronics EMS.
The SM4 comes standard with a software (Autotune). Apparently you can auto-tune the engine using wideband lambda and O2 sensor. Bsed on the infromation from autronics.com, it is a self tuning ECU. How reliable is Autotune? Anyone?

 

The SM4 comes standard with a software (Autotune). Apparently you can auto-tune the engine using wideband lambda and O2 sensor. Bsed on the infromation from autronics.com, it is a self tuning ECU. How reliable is Autotune? Anyone?

I wouldn't use the autotune function unless you are going to tune the car on the dyno. You need to hold the rpm as well as the load in each point on the map for the autotune function to work. I never use the autotune function. Best way of tuning is manual tuning.

 

the auto tune feature works well on the dyno and can also be used with simple maths functions (in the software) to tune from logs... works just as well on the road as it does on the dyno (dyno is a scoshe faster and safer, ie. no people to hit or laws to break)... autotune is very fast and can be calibrated for error percentage (to speed base tuning... ~5%) and then fine tuned later...

-franz

if you have any other questions, PM me as i don't frequent much past the frontpage of evom.

 

Hy!

are there any news (price, availability) regarding the Evo IX PnP Board?

TIA

 

As posted on another thread;With all due respect, I'm not so sure...

If it doesn't look like this one then it may just be an SM4 on an adaptor board (which doesn't have enough outputs to do everything properly). And this one is still undergoing testing / updating for a while yet.

 

it looks EXACTLY the same....as I said, go to SEMA2006! It is already there

New chip and new things...go and see, it is from 31 Oct to 3. Nov. I am flying from Croatia to NY and the driving to LV. It's gonna be a nice trip.

EVO9 PNP board will be displayed on SEMA for the first time.

 

So when are they on sale? And who has them?

 

Hy!

I asked my local dealer about September 5th, he said 3-4 weeks so I asked again October 5th and he could not give a reliable date, he said that he has to wait untill the boards are available so I mailed autronics.

"The first boards are presented at the SEMA. After that a limited number of boards will be available. By late December there should be a lot more available."

Reads to me, as I don't like the "should be": If you can get your hands on one of these boards this year, you're damn lucky. I will try to

The dealerlist is found on the autronic website.

 

As I am an autronic dealer for my country, I know FOR SURE that the board IS made, it will be presented on SEMA and if someone is very impatient, ask your dealer to get you one...I know for a fact that one is always available

 

Hy!

Where Do you think I got the statement "The first boards are presented at the SEMA. After that a limited number of boards will be available. By late December there should be a lot more available." from? Its a statement directly from one of the autronics guys. I think the autronics dealer for my country knows that I want one of these PnP, as I have told him to get one asap.

So all I have to do is wait till the dealer is coming up with good news.

 

I know exactly from who, as these words are a qoutation of someone else

don't worry, evo9 boards will be available very soon!

 

OK, did ANYBODY visited Autronic 20133 booth on SEMA?

All ppl from autroni are right there ready to answer all your questions and to give you the directions and qoutations. Anybody interested?!

 

I was there and Ray Hall told me that 30 days from sema to release to the public.
I see the new board right there and is a plug & play unit