Hey TTP
Thread Starter
Evolved Member
iTrader: (27)
Joined: Nov 2003
Posts: 2,123
Likes: 1
From: Oak Creek, WI
Hey TTP
LIST UPDATED
Where are you located in orlando? I might leave my car with you for a day or so right after I get down there. I figured out what I want done.
Flash for 780's, rev limit and feul cut removed
Maftpro boost control installed
Re-wire and remount my alky kit (Coolingmist)
UICP w/ AIT sensor bung. New AIT (mine will not be reusable) w/ Tial flange for BOV
This is the list so far, it will be added onto as I remember stuff. If you need any money up front to start this let me know.
Joey your still coming up for new years right?
Where are you located in orlando? I might leave my car with you for a day or so right after I get down there. I figured out what I want done.
Flash for 780's, rev limit and feul cut removed
Maftpro boost control installed
Re-wire and remount my alky kit (Coolingmist)
UICP w/ AIT sensor bung. New AIT (mine will not be reusable) w/ Tial flange for BOV
This is the list so far, it will be added onto as I remember stuff. If you need any money up front to start this let me know.
Joey your still coming up for new years right?
Last edited by dryad001; Dec 1, 2005 at 02:55 PM.
Originally Posted by dryad001
Where are you located in orlando? I might leave my car with you for a day or so right after I get down there. I figured out what I want done.
Flash for 780's, rev limit and feul cut removed
Maftpro boost control installed
Re-wire and remount my alky kit (Coolingmist)
This is the list so far, it will be added onto as I remember stuff
Joey your still coming up for new years right?
Flash for 780's, rev limit and feul cut removed
Maftpro boost control installed
Re-wire and remount my alky kit (Coolingmist)
This is the list so far, it will be added onto as I remember stuff
Joey your still coming up for new years right?
I am out by the airport OIA.
Anyhow, YES on the flash injector scaling. NP
MaftPro boost solenoid installed and tuned NP
Rewire and remount alky kit? From the engine to the trunk or?
What is up with the wiring?
Originally Posted by dryad001
Where are you located in orlando? I might leave my car with you for a day or so right after I get down there. I figured out what I want done.
Flash for 780's, rev limit and feul cut removed
Maftpro boost control installed
Re-wire and remount my alky kit (Coolingmist)
This is the list so far, it will be added onto as I remember stuff
Joey your still coming up for new years right?
Flash for 780's, rev limit and feul cut removed
Maftpro boost control installed
Re-wire and remount my alky kit (Coolingmist)
This is the list so far, it will be added onto as I remember stuff
Joey your still coming up for new years right?
Thread Starter
Evolved Member
iTrader: (27)
Joined: Nov 2003
Posts: 2,123
Likes: 1
From: Oak Creek, WI
Originally Posted by TTP Engineering
Rewire and remount alky kit? From the engine to the trunk or?
What is up with the wiring?
What is up with the wiring?
I used solid wire instead of stranded wire, I wanted to re-do it but time and weather has said other wise, since it's going to be about 60 degrees warmer down there it might be a good choice to get it done there. I have everything mounted so its a wiring job from the trunk forward, I'll let you see it first hand when I get down there so you can quote me a price.
Joey, I guess there is a pretty decent place for NYE party 1/4 mile from where I will be staying
Thread
Thread Starter
Forum
Replies
Last Post
[WTB] Omni 4 bar AIT sensor
Tmosser
For Sale/WTB - Engine / Drivetrain / Power
0
Apr 5, 2017 03:20 PM
evovin
Water / Methanol Injection / Nitrous Oxide
10
Jun 16, 2009 12:23 AM