12v source for gm maf
#1
Evolving Member
Thread Starter
Join Date: Jul 2003
Location: U.S.M.C.
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
12v source for gm maf
any one knows where i can tap into a 12v source for my 3inch gm maf ...?
grrrrr its my last connection left but im clueless where to connect to...
and no i dont have a mutil whatever meter lol haha...
thanx
grrrrr its my last connection left but im clueless where to connect to...
and no i dont have a mutil whatever meter lol haha...
thanx
#2
EvoM Guru
iTrader: (5)
Well, you SHOULD have a multimeter if your attempting this stuff yourself, but I can preach to you later..
the stock MAF harness has a 12v source, it should be green with a red stripe on it if I recall, but the easiest way to know is to USE A MULTIMETER.... (if you need under hood power source)
the stock MAF harness has a 12v source, it should be green with a red stripe on it if I recall, but the easiest way to know is to USE A MULTIMETER.... (if you need under hood power source)
#4
Evolving Member
iTrader: (4)
Join Date: Feb 2004
Location: Middletown, MD
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I agree with Jack I pulled mine from the harness. Also, same as Jack, I ending up getting a broken MAF and using it's connector(PnP). For reference the 12v is the middle pin of the 7 on the MAF connector.
Ivan
Ivan
#6
Evolving Member
iTrader: (4)
Join Date: Feb 2004
Location: Middletown, MD
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
I got mine from a local friend. His screen was messed up. He got a replacement and gave me his old messed up one. I took that apart and connected it to the GM pigtail. So now I can switch between the stock and GM Maf with no wiring changes.
Trending Topics
#8
Evolving Member
iTrader: (4)
Join Date: Feb 2004
Location: Middletown, MD
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
If for whatever reason I need to go back to the stock computer only. I also do a decent amount of alpha/beta testing for Tom. So I need to be able to tell him if it works on both setups.