Notices
General Engine Management / Tuning Forum Discuss general EMS tuning concepts that do not pertain to a specfic brand or product.

safc2 install on EVO IX

Thread Tools
 
Search this Thread
 
Old Jun 18, 2006 | 08:31 AM
  #1  
Darth VaderIX's Avatar
Thread Starter
Newbie
 
Joined: Nov 2005
Posts: 4
Likes: 0
From: Boise,ID
safc2 install on EVO IX

has anyone done this yet? are the pin outs the same as on the VIII?
Reply
Old Jun 18, 2006 | 09:00 AM
  #2  
Warrtalon's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2004
Posts: 20,790
Likes: 2
From: Long Island, NY
The pin-outs are not the same, and there is no patch harness. The IX ECU has 3 plugs while the VIII has 4 plugs. You cannot manipulate the MIVEC with an SAFC, so it's a huge waste of time and money to use an SAFC on your IX when you get 30-40whp from a flash for as little as $199.
Reply
Old Jun 18, 2006 | 12:08 PM
  #3  
Darth VaderIX's Avatar
Thread Starter
Newbie
 
Joined: Nov 2005
Posts: 4
Likes: 0
From: Boise,ID
Originally Posted by Warrtalon
The pin-outs are not the same, and there is no patch harness. The IX ECU has 3 plugs while the VIII has 4 plugs. You cannot manipulate the MIVEC with an SAFC, so it's a huge waste of time and money to use an SAFC on your IX when you get 30-40whp from a flash for as little as $199.
thanks, thats all i needed to hear. what flash would you go with? im ready to send off my ECU ASAP.
Reply
Old Jun 20, 2006 | 09:17 AM
  #4  
Warrtalon's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2004
Posts: 20,790
Likes: 2
From: Long Island, NY
Dynoflash, of course. I'm not even sure what other tuners do mail-ins for the IX, but I do know that none cost $199 like Dynoflash.
Reply




All times are GMT -7. The time now is 05:38 PM.