Hey so i finally got a new laptop to tune with and i was just installing all the necessary software such as evoscan .99 and ecuflash. I went out to take some logs and evoscan would successfully connect, but then timeout and reconnect repeatedly. Im talking like 50 times and going at a very fast pace. I checked my com ports and everything was in order, i feel like there is something still wrong (obviously). Im also using an innovate lc-1 to log afrs. thanks again.

 

If you dont have a WB installed in your car, then uncheck "External WideBand A/F ratio".

 

no i have a wideband installed, i believe the error is coming from the tactrix usb because it keeps timing out. any ideas?

 

Cable could be bad. You might want to uninstall the device in device manager and re-install to re-install your driver. It definitely sounds like a hardware error. The cable could have gone bad, but I would check your drivers first. If it is not the driver, re-install evo scan and try again.

 

anyone else??