This is the correct wiring for the Injector harness

Injector 1 goes to ECU Pin 1 with the Blue and Red Wire

Injecto 2 goes to ECU Pin 14 with the Orange and Red Wire

Injector 3 goes to ECU Pin 2 with the Yellow and Red Wire

Injector 4 goes to ECU Pin 15 with the Purple and Red Wire



Thanks,
Jeff

 

did you ever try this to see if it was correct???
I will be installin mine soon...

-non

 

yes what I have posted is correct. So this is now an injector harness wiring DYI

 

jeff did you just tap into the wires???

-non

 

I just tapped them, i did not cut them, just stripped some insulation off the wire, wired in the harness and solder all connections

 

old post but is red positive or negative?

 

dont even waste of money on an emanage for the evo, Fries the coil packs, Use ecuflash its free