ok this is by far the quiest forum ever come on emange people... anyways I will be receiving my emanage on monday or tuesday and was wondering where I get the firmware update from...

-non

 

http://autos.groups.yahoo.com/group/emanage/

 

I subscribe to that group and no one there seems to have a difinitive answer.

 

Go to the files section. You'll see firmware 1.36 to download.

 

Here....... the zip file is attached.

 

how do I run the update do I have to copy it somewhere or what???

-non

 

http://www.mohdparts.com If you can't find your answer there, or if Mohd can't answer your question- then there isn't an answer.
And really, if you're into it enough that you're going to install an eManage and try to tune it yourself, you're gonna need to get the info on how it works and what it can do, now-ish.
you need to load it onto the laptop that you're tuning the eManage with, using the support tool. Then it gets loaded into the memory of the eManage. There are a few quirks, and it may, in fact, fry your eManage, but I think that was just with the older models and ALL of them that had this problem were replaced without hassle.
Be especially careful with the injector harness, it routinely fried the Evo VII. I also think they may have fixed that in this firmware update, and the VIII may not have had the problem. Don't know for sure. The Yahoo eManage group REALLY is the best place to look and be sure to subscribe to the user group.

Good luck dude

 

Oh and part of the reason this forum is so quiet is that Mark put the eManage forum with the Evo stuff. Despite several of us BEGGING him not to. See, there are quite a few lancer guys running these, and the Evo set doesn't tend to listen to us, so we don't bother coming over here offering info.

just another $0.02