I have the Road Race Wiring Diagram and some wires from another post, but after looking at the wires coming out of my S-AFCII I found that I will have three wires left over. I will have a yellow, a white and a blue wire coming from the S-AFCII with no where to conect the wires to the ECU. If I could get some help on this that would be great here is the wire and pin placements that I have at this moment:

Power (red)- pin 25
Ground (brown)- pin 13
Ground (Black)- pin 26
RPM (green)- pin 58
TPS(Grey)- pin 84
Airflow signal out(pink)- pin 79
Airflow signal in(orange)- pin 90
Konck Sensor(purple)- pin 78

Any help would be great

 

yes you will have some wires left over, from what I remember, I think those 3 are fine. The SAFCII is universal so you know that they will have more wiring then what the evo will need.

 

Thanks I will wire it up and see what happens...

 

Yea, you'll have left over wires, they work on other car applications with twin turbo setups and different sensor types. It will be fine-