230whp
That was at 6psi. He tracks at 8 or 9 psi (i forget which) which would put him very near 200whp.
If you can control your fuel well enough and richen out your AFR enough to prevent detonation then the strength of your pistons and con rods are the only limiting factors for hitting 230whp.
If you can control your fuel well enough and richen out your AFR enough to prevent detonation then the strength of your pistons and con rods are the only limiting factors for hitting 230whp.
Simply put: yes. 230 is definitely doable. I'm pretty sure that's approaching the neighborhood of valve work too, but no one's really gotten far enough to know/have a catastrophic failure yet.
Trending Topics
Soon to find out....I will dyno
still doing my break in 600 more
miles to go then i can add on
my greddy profec boost controller
and see what the car is capable
of so far so good...
still doing my break in 600 more
miles to go then i can add on
my greddy profec boost controller
and see what the car is capable
of so far so good...
sure did got the ..forged pistons
..rrm feflashed ecu
..rrm LSD
..stage 2 clutch
..rrm header
..rrm bored t.b.
..rrm fmic turbo kit obviously
..greddy exhaust sorry (rob just had to get it)
..also suspension.. rrm lower sway bar
..rrm strut bar
..rrm perches
..b&m short throw shifter
..by sunday greddy profec boost controller
still doing break in
and last but not least intercooler sprayer kit
with purge kit...
not sure if i forgot anything else
pretty much all of whats on rrm site hehe
specificly performance parts all go no show
mmmmm!!!!!
..rrm feflashed ecu
..rrm LSD
..stage 2 clutch
..rrm header
..rrm bored t.b.
..rrm fmic turbo kit obviously
..greddy exhaust sorry (rob just had to get it)
..also suspension.. rrm lower sway bar
..rrm strut bar
..rrm perches
..b&m short throw shifter
..by sunday greddy profec boost controller
still doing break in
and last but not least intercooler sprayer kit
with purge kit...
not sure if i forgot anything else
pretty much all of whats on rrm site hehe
specificly performance parts all go no show
mmmmm!!!!!
for sure i ll be known here in the streets
of the midwest gotta represent from IL
also forgot
..rrm test pipe
pay yours off itll be the best investment
you ever made but im still waiting to find
out myself what am i doing i should be
drivinv eh? lol
of the midwest gotta represent from IL
also forgot
..rrm test pipe
pay yours off itll be the best investment
you ever made but im still waiting to find
out myself what am i doing i should be
drivinv eh? lol




