03 lancer es Evo 8 build
 

Newwwwww setup

FULLY BUILT MOTOR:
CROWER RODS
JE PISTONS
ARP HEAD BOLTS AND STUDS
RPW CAM

FUEL:
650CC INJECTORS
Fuel Lab FPR
Walbro 255

COMPUTER MANAGEMENT:
EVO 8 TephraMOD V7

INTAKE:
EVO 8 MAF
HKS Filter

http://www.youtube.com/watch?v=13gxRgubYhM

http://www.youtube.com/watch?v=y08v5...layer_embedded

http://www.youtube.com/watch?v=dyoUUYnpC0k

http://www.youtube.com/watch?v=dyF_sr8N1Ao

300 WHP currently untill im fully tuned!

I was a complete noob at this when i started in febuary of 09 and from all the help i had from this site i was able to put on this custom turbo by myself for the most part. The car is so fun even now when its not tuned fully!!! : ) im trying to make a list of everything u need and videos will be posted too along with pics.

What I have~!

Turbo Manifold from www.speedcorps.com
Evo 8 16g Turbo with 10.5 hotside from pbevo12

From Magicmared:

Evo 9 Downpipe
Evo 9 Intercooler
Evo 9 Intercooler Piping
Evo 9 intake Pipe

Wrx 440 cc Injectors ( keep stock rubber ring and spacer) from a neighbor
Walbro 255 fuel pump from www.speedcorps.com
Forge adjustable Wastegate Actuator
7 - 10 pound actuator spring from www.speedcorps.com
Manual Boost controller from www.speedcorps.com
Innovate LC-1 Wideband from www.speedcorps.com
fuel pressure regulator from www.speedcorps.com
blue couplers www.speedcorps.com
Greddy Blow Off Valve Type RS comes with recirc adapter from www.speedcorps.com
clutchmaster stage 3 from www.speedcorps.com
10" push/pull Slim Fan from advanced auto parts!
fragola ss braided steel line ( 4 feet - 4an )
Felpro exhaust manifold gasket ( metal )
OEM evo 8 manifold to turbo gasket
Skull shift knob
Short Shifter
Carbon Fiber Autometer Boostgauge
Triple pillar from lancer shop
NEW waterpump, timing belt, and throwout bearing.
5/8 heater hose 90 degree bend ( 1 foot )
5/8 hose fitting
- 6an to hose barb fitting
1/2 inch 90 degree to - 6 an female
-6an male to - 4an male
oil feed to turbo fitting can be done in 2 ways, ill get the details
RTV silicone gasket sealer
1 bolt ( M8 x 1.25 ) for the left lower intercooler pipe
radiator mount kit
kinda straight but not lol radiator hose for BOV to Upper intercooler pipe ( 1 foot )
break cleaner fluid.....rags.....
little breather filter
lots of 1/4 inch hose
teflon tape
injector o - rings
valve cover gasket
5w 30 oil
75 85 gear oil
antifreeze
brake fluid
exhaust flange from meineke, try get a 3 inch but they do have one that matches the evo 8/9 downpipe
Tien Lowering springs




https://www.evolutionm.net/forums/me...re4406-048.jpg

https://www.evolutionm.net/forums/me...31958-5881.jpg

if substitutions can be made then please let me know

we also have the wastegate actuator, AEM wideband, fuel pump, and if you want you can pick up a full 3" evo downpipe from us too. {thumbup}

could i get the wastegate actuator 7-10psi spring and put it in the stock evo 8 one, is that possible

i don't think so. You need the forge adjustable one i believe.

just about everything that list can be found used here on the forums btw. Just takes time to search. Took me 4 months to gather my parts.

yeea im searching lol

good list zulu. jump on nasoic forum for those wrx injectors, i dont think ill be selling mine anytime soon. (might be like june till i switch them up)

k thanks demon

Oil feed lines can be made or you can buy them for cheap here: http://www.obxracingsports.com/products.php?pk=1066

probably will make them!

i have no idea bout lancer blocks, can it withstand the boost? how much boost will you be running?

7 psi

The stock wastegate actuator is 11.5 psi ... you don't need the Forge unit for your application. It will boost 18 psi+ with that actuator installed.

i can only boost 7 - 10 so im installing that type of spring in it plus i have stock one for when i build the internals