03 lancer es Evo 8 build
Thread Starter
Evolved Member
iTrader: (8)
Joined: Oct 2008
Posts: 789
Likes: 0
From: Toms River, New Jersey
03 lancer es Evo 8 build
Newwwwww setup
FULLY BUILT MOTOR:
CROWER RODS
JE PISTONS
ARP HEAD BOLTS AND STUDS
RPW CAM
FUEL:
650CC INJECTORS
Fuel Lab FPR
Walbro 255
COMPUTER MANAGEMENT:
EVO 8 TephraMOD V7
INTAKE:
EVO 8 MAF
HKS Filter
http://www.youtube.com/watch?v=13gxRgubYhM
http://www.youtube.com/watch?v=y08v5...layer_embedded
http://www.youtube.com/watch?v=dyoUUYnpC0k
http://www.youtube.com/watch?v=dyF_sr8N1Ao
300 WHP currently untill im fully tuned!
I was a complete noob at this when i started in febuary of 09 and from all the help i had from this site i was able to put on this custom turbo by myself for the most part. The car is so fun even now when its not tuned fully!!! : ) im trying to make a list of everything u need and videos will be posted too along with pics.
What I have~!
Turbo Manifold from www.speedcorps.com
Evo 8 16g Turbo with 10.5 hotside from pbevo12
From Magicmared:
Evo 9 Downpipe
Evo 9 Intercooler
Evo 9 Intercooler Piping
Evo 9 intake Pipe
Wrx 440 cc Injectors ( keep stock rubber ring and spacer) from a neighbor
Walbro 255 fuel pump from www.speedcorps.com
Forge adjustable Wastegate Actuator
7 - 10 pound actuator spring from www.speedcorps.com
Manual Boost controller from www.speedcorps.com
Innovate LC-1 Wideband from www.speedcorps.com
fuel pressure regulator from www.speedcorps.com
blue couplers www.speedcorps.com
Greddy Blow Off Valve Type RS comes with recirc adapter from www.speedcorps.com
clutchmaster stage 3 from www.speedcorps.com
10" push/pull Slim Fan from advanced auto parts!
fragola ss braided steel line ( 4 feet - 4an )
Felpro exhaust manifold gasket ( metal )
OEM evo 8 manifold to turbo gasket
Skull shift knob
Short Shifter
Carbon Fiber Autometer Boostgauge
Triple pillar from lancer shop
NEW waterpump, timing belt, and throwout bearing.
5/8 heater hose 90 degree bend ( 1 foot )
5/8 hose fitting
- 6an to hose barb fitting
1/2 inch 90 degree to - 6 an female
-6an male to - 4an male
oil feed to turbo fitting can be done in 2 ways, ill get the details
RTV silicone gasket sealer
1 bolt ( M8 x 1.25 ) for the left lower intercooler pipe
radiator mount kit
kinda straight but not lol radiator hose for BOV to Upper intercooler pipe ( 1 foot )
break cleaner fluid.....rags.....
little breather filter
lots of 1/4 inch hose
teflon tape
injector o - rings
valve cover gasket
5w 30 oil
75 85 gear oil
antifreeze
brake fluid
exhaust flange from meineke, try get a 3 inch but they do have one that matches the evo 8/9 downpipe
Tien Lowering springs
Last edited by zulu989; Jan 29, 2011 at 07:50 PM.
Trending Topics
Oil feed lines can be made or you can buy them for cheap here: http://www.obxracingsports.com/products.php?pk=1066
