can't get keyless entry prog procedure to work
Thread Starter
Newbie
Joined: Jan 2004
Posts: 18
Likes: 0
From: Colorado
can't get keyless entry prog procedure to work
I've tried the programming keyless entry procedures that have already been posted but I can't get the step: 'press hazard switch 6 times within 10 seconds' to work. It doesn't ever lock and unlock the doors for me (which indicates programming mode). I have pin one shorted to pin 4 or 5 via paperclip on the data link controller. Any help would be appreciated.
Thx
Thx
Last edited by tdigden; Apr 27, 2006 at 12:11 PM.
Newbie
Joined: Jun 2005
Posts: 38
Likes: 0
From: Southern Illinois
Try an actual piece of wire to jumper the pins together. Sometimes paperclips have a thin galvanized type of coating that keeps them from being electrically conductive. This should solve your problem.
Evolving Member
Joined: Oct 2004
Posts: 429
Likes: 0
From: Ohio
Originally Posted by tdigden
I've tried the programming keyless entry procedures that have already been posted but I can't get the step: 'press hazard switch 6 times within 10 seconds' to work. It doesn't ever lock and unlock the doors for me (which indicates programming mode). I have pin one shorted to pin 4 or 5 via paperclip on the data link controller. Any help would be appreciated.
Thx
Thx
