It has been said several times here that the manual can be hooked to an auto car. Could someone please either send me a pm or make a post about how this is done? Thanks a lot, peace

 

i dont think so u can do that.......if you do, there it will give u more problems. Dont do it, just get the piggy for auto

 

As far as I know, it is the same piggy, the only thing different for a manual vs. an automatic car is the wiriing. So if you use the instructions for the automatic install then you should be fine.

 

the piggy back is the same for ALL cars... it doesnt matter wether its auto or manual. only difference is you have to wire it to the ECU differently on the auto. and differently on the manual..... Basicly... the wiring is the ONLY difference!

 

call up RRM and we'll email you the instructions if needed. If the maps are different, then you may want to buy the software and have us email you them as well.

Just give us a call...

 

i beleive the auto and 5spd settings are a bit different because autos are more prone to a rough idle, so they have to be set differently.