High RPM after replacing the PCV valve
Thread Starter
Newbie
Joined: Feb 2017
Posts: 3
Likes: 0
From: Calgary Alberta
High RPM after replacing the PCV valve
Hi there Lancer experts,
I was hoping some of you could help me with an issue I've experiencing recently. I recently replaced my PCV valve on my 2008 Mitsubishi Lancer ES 5 Speed Manuel and ever since it would idle high (1500+) when cold and when shifting gears the RPM is stuck at 1500+ and does not drop down to normal idle (around 750) until the engine is fully warmed up. I checked the around the PCV valve for any leaks but everything seems fine. Have I missed anything ? Any help would be greatly appreciated
I was hoping some of you could help me with an issue I've experiencing recently. I recently replaced my PCV valve on my 2008 Mitsubishi Lancer ES 5 Speed Manuel and ever since it would idle high (1500+) when cold and when shifting gears the RPM is stuck at 1500+ and does not drop down to normal idle (around 750) until the engine is fully warmed up. I checked the around the PCV valve for any leaks but everything seems fine. Have I missed anything ? Any help would be greatly appreciated
Thread
Thread Starter
Forum
Replies
Last Post
Fstyles05EB
Evo Engine / Turbo / Drivetrain
5
Jan 31, 2017 04:39 AM
anthonyrb98
For Sale - Wanting To Buy (WTB) Or Trade (WTT)
2
May 2, 2011 03:31 PM
berkel
Evo Engine / Turbo / Drivetrain
7
Jul 8, 2010 01:56 PM
Johnboy1065
Evo Engine / Turbo / Drivetrain
16
May 4, 2009 11:39 PM
smokedmustang
Evo Engine / Turbo / Drivetrain
12
Sep 17, 2007 02:25 AM