Notices
Lancer Engine Tech Discuss specs/changes to the engine from cams to fully balanced and blueprinted engines!

SRI for 05 ES... yeah right... HELP

Thread Tools
 
Search this Thread
 
Old Feb 28, 2006 | 04:56 PM
  #1  
AndrewMMueller's Avatar
Thread Starter
Evolving Member
 
Joined: Feb 2006
Posts: 158
Likes: 0
From: Shrewsbury MA
Exclamation SRI for 05 ES... yeah right... HELP

So yeah, i think ive come to the sad realization with my new car. No one makes anything for the 05 lancers... its like they fell off the face of the planet... everything is 02 - 03 or 02 - 04... what happened to the 05? more so the 06? i mean its feb. were not too far into 06 but 05? i need help.. i have a list of mods i want to complete and im asking for anyones help on knowlege of 04 or 03 parts that will fit the 05. BTW i used to own a pontiac, so im 100% new to mitsu or jap cars in general..

Front and Rear strut tower braces
Lower tie rod brace
SRI
Breather
Straight through exaust.

more so, i want nothing more then to ditch my stock gauge face.. everyone says that you can slap on an OZ.. sure.. but once again.. is that ONLY with the damn 04's? or can i slap on 04 OZ gauge face onto my 05 ES? please help...

So god damned frustrated.
Reply
Old Feb 28, 2006 | 05:00 PM
  #2  
joberk3's Avatar
Evolving Member
iTrader: (4)
 
Joined: Dec 2005
Posts: 372
Likes: 0
From: Charleston, SC
correct me if im wrong people, but i thought they grouped the lancers by 02-03, 04-05, so i think anything u can do to an 04, you can do to your 05.

im pretty sure any of the 04 parts will def. fit your car. these especially being: Front and Rear strut tower braces
Lower tie rod brace
SRI
Reply
Old Feb 28, 2006 | 05:04 PM
  #3  
AndrewMMueller's Avatar
Thread Starter
Evolving Member
 
Joined: Feb 2006
Posts: 158
Likes: 0
From: Shrewsbury MA
Exclamation i am the mitsu newbitsu

I wont be doing any correcting of any type good sir.. you see that newbie under my name? 100% ive been trolling these forums every day for a straight week.. just trying to get my bearings.. the car was more like "hey want a car? sure.. "here take it its yours"... whats wrong with it? "Rear right window dosnt go down,".... why though? "my parents got it for me as a gift, i didnt want it, "ill give it to you for 30 bucks and a lift back to my house"

so here i am with an 05 ES... but i sure hope anything you can do with an 04 you can do with an 05.. cause that would make my life ALOT easier... more input please on any of those mods if you can... any help at all will be greatly appreciated
Reply
Old Feb 28, 2006 | 05:05 PM
  #4  
mitsuozboi's Avatar
Evolved Member
iTrader: (18)
 
Joined: Apr 2005
Posts: 4,021
Likes: 1
From: Waterville, ME
+1, I stated this I think in a past thread that you mentioned this. the years 04-06 are almost identical except the front bumper changed a bit. most peices fit either 02-03 or 04-06 like joberk said. Plus if you want something, you can allways give the company a call and ask them..... www.roadracemotorsports.com is a good place to find that stuff
Reply
Old Feb 28, 2006 | 05:14 PM
  #5  
AndrewMMueller's Avatar
Thread Starter
Evolving Member
 
Joined: Feb 2006
Posts: 158
Likes: 0
From: Shrewsbury MA
Thanks a bunch guys, just needed a deffinate answer on that. but once again if anyone can pick out best exact parts that would be great... gotta get my mitsu education somewhere
Reply
Old Mar 1, 2006 | 01:51 AM
  #6  
HobieKopek's Avatar
EvoM Staff Alumni
20 Year Member
iTrader: (8)
 
Joined: Feb 2002
Posts: 7,701
Likes: 0
From: Long Island
Check the existing threads. There has been a megaton of information posted in the 4 1/2 years prior to your posting here. If I see another "what's the best (insert part here)??????" thread I'm going to stab somebody in the throat.
Reply
Old Mar 1, 2006 | 05:18 AM
  #7  
turboturd's Avatar
Newbie
 
Joined: Feb 2006
Posts: 9
Likes: 0
From: pensacola,florida
when my friend got his 04 es there was nothing for it for like forever. so if nothing from the 04 fits your car then u might just have to be patient.
Reply
Old Mar 1, 2006 | 07:33 AM
  #8  
N1te's Avatar
Evolved Member
iTrader: (12)
 
Joined: Nov 2004
Posts: 1,704
Likes: 0
From: Northern Virginia
Originally Posted by HobieKopek
Check the existing threads. There has been a megaton of information posted in the 4 1/2 years prior to your posting here. If I see another "what's the best (insert part here)??????" thread I'm going to stab somebody in the throat.
I block your blow
Reply
Old Mar 1, 2006 | 11:55 AM
  #9  
HobieKopek's Avatar
EvoM Staff Alumni
20 Year Member
iTrader: (8)
 
Joined: Feb 2002
Posts: 7,701
Likes: 0
From: Long Island
Originally Posted by turboturd
when my friend got his 04 es there was nothing for it for like forever. so if nothing from the 04 fits your car then u might just have to be patient.
There were things for it, just not a wide selection. The interior and engine are more or less identical to prior years except for the returnless fuel system and a couple other tiny changes.
Reply
Old Mar 1, 2006 | 09:05 PM
  #10  
mtags24's Avatar
Evolved Member
iTrader: (5)
 
Joined: Sep 2005
Posts: 714
Likes: 0
From: Washington DC
In general anything that fits an 04 will fit an 05. I would suggest RRM or RDD (do a search and you'll find the guy that sells these for a good price) for the bars and any sri will fit 02-06. Since there really isn't any difference between sri's go for what is cheap and looks good. i happen to like the carbon fiber heatshield for rrm and thats what i've got in mine now. Exhaust systems for 04-06 are virtually non-existent so a custom job is necessary. Just get a nice muffler and go to a shop and have them do custom piping (prob wanna do 2.25 and no larger. keep your stock cat on and maybe throw on a resonator to keep the sound down and to keep your backpressure). I've got RRM's axleback and i'll take it to a shop next week and make it into a full cat-back. good luck!
Reply
Old Mar 1, 2006 | 09:13 PM
  #11  
04lancerEsGuy's Avatar
Evolved Member
iTrader: (3)
 
Joined: Nov 2004
Posts: 1,182
Likes: 0
From: So Cal
ENGINE WISE:

04=05=06

EXTERIOR WISE:

04=05.

06 - Only Front bumper is different.

....correct me if i am wrong.
Reply
Old Mar 20, 2006 | 06:37 AM
  #12  
davids2004's Avatar
Account Disabled
iTrader: (3)
 
Joined: May 2004
Posts: 432
Likes: 0
From: Houston
04-06 should all be very similar in the parts they use.
Reply
Old Mar 20, 2006 | 07:44 AM
  #13  
MIA2FASLANCER's Avatar
Newbie
 
Joined: Jan 2006
Posts: 98
Likes: 0
From: Miami
all u need

All u need to know

WWW.ROADRACEMOTORSPORTS.COM

Thats it
Reply
Old Mar 22, 2006 | 05:11 PM
  #14  
LancerMarita's Avatar
Evolving Member
iTrader: (3)
 
Joined: Jan 2005
Posts: 187
Likes: 0
From: Kent, WA
I know from experience that the RMR front strut tower bar, K&N SRI, and B&M short shifter for the 02-03 will fit the 04s+.

I'm sure many other similar parts will be the same.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KFC-AWD
Evo Engine / Turbo / Drivetrain
4
May 25, 2016 07:04 AM
mstove
Lancer Engine Tech
5
Apr 27, 2008 01:44 PM
10thAnv
Lancer Show / Shine
11
Apr 27, 2007 12:51 PM
Racer24x
Lancer Show / Shine
10
Nov 25, 2006 09:57 AM
Destroyer101
Lancer Aftermarket Forced Induction Tech
4
Mar 9, 2006 06:23 PM




All times are GMT -7. The time now is 06:43 PM.