Hi guys, I tried to install the SE exhaust today, however for some reason the car rubber hangers doesn't seems to line up with the exhaust. Out of the 3 support points, I could only line up the one (circled in red) to one of the car hanger, however theres NO hangers on the car for the other 2 support points.

I have also included all the accessories that came with the exhaust for reference.

If you have successfully installed this exhaust on a 08 Lancer, please take a look at the photos and see if you can spot whats wrong...

Thanks!

 

Nice exhaust and i see you are from Oakville.

Pm Brad he had a blue GTS that he wrecked and now has a Blue Ralliart. He had the same exhaust so maybe he can help you out.

brads09lancerGT <-- Board name.

When you do get it figured out post some pics.

 

u have to reuse the rubber hanger pieces from the stock exhaust

 

I expected that, however with the position of the exhaust, there no 'hook' on the car to mount two of the rubber hangers.

I will contact the mentioned member and see if he can give me some advice...thx guys!

 

http://www.youtube.com/watch?v=X8PbE...layer_embedded

 

Were you able to install your exhaust?? Please let me know. Having the SAME EXACT problem.

 

He made this thread 2 years ago bro, I doubt you'll get a response from him. Watch the video.