also forgot to mention most sparkplugs come oem pregapped, but I would double check..for the 2002 Lancer I know the gap is .044"

 

need to bump.. i need to know exactly which denso iridiums will work on my lancer 03 oz rally? plz!!!

 

Part number IK16

As much as I love this site, it's not the ONLY place for information. I just spent 5 minutes to look at the denso website www.densoiridium.com and then compared part number listed on the NGK site www.ngksparkplugs.com to make sure that any spark plug listed for the 1.8 Mirage would fit the 2.0 Lancer. Voila! It does. Now if you need somewhere to buy them from, I suggest www.optauto.com

 

pre-turbo I used Champion platinums..only $2 a piece but changed every 10k miles... Car ran great!

 

Man, Urbanknight, you should get paid for all the good advice you give out here =)

I don't think there is a single question here for us U.S. Lancers that you don't take the time to answer, it's very much appreciated.

 

Thanks Adam, I accept paypal, money orders, checks, cash, hot women, and car mods It's nice to help out, I got plenty of great advice from this site as well as other motorsports events. Besides, I'm an internet junky, how else would I keep my insomniac state?

 

does any one know the gap on the plugs, what is too much and to little

 

oh and if i should pay the $40 for the denso how long do they last

 

a search would have gotten you to this:

https://www.evolutionm.net/forums/sh...9&postcount=16

Also, if you read the top post on this exact page, soemone mentions 0.44 as the gap for the US Lancer.

 

Um, the info at the above link should be in inches!!

In millimeters (mm) it should be 1.0 - 1.1 .

Also "0.44" (in.?) thats about half and inch! Did we miss a zero somewhere?

 

yeah, probably , but if you click on that search, you'll see that I mentioned 1.1mm in another thread. It's all out there.