Ive been working on a cheaper more affordable way of gaining some extra horsepower for my lancer and i have com up with a TRUE COOL AIR INDUCTION system which makes a lot of sense to me if anyone is interested please resond and i will post my diagram once i see that some people interested. Im thinking it will cost around 400$ but it will boost your car about 30 horses.
Thanx

 

Please let me know how and what too do and how to order thanks ??>....

 

$400 for 30 horses? seems a little fishy, but whatever this cold air induction system you have planned i'd like to see

 

Let's see the diagram first

 

30 HP? From an air intake? Uh huh...

 

uhhh unless your a or have magic powers 30hp LOL ill believe when we see a dyno sheet there has 2 be more then a intake 2 produce 30more hp and is this 30 hp to the wheels or fly wheel?

 

Im in the closing stages of my true cool air induction system, and then it will be installed on my car but going over my design with engineers they say it should increase airflow over 10 times the factory airflow and decrease the temperature of the air dramatically. Once its installed and i have the Dyno results i will post them but it may be a few more weeks so please be patient i would love to beable to install one in all your lancer and evo's.NO BULL**** THIS WILL ADD 27 - 34 HORSEPOWER TO YOUR LANCER.

THANX

 

Alright you can increase airflow over the stock setup, but that's not hard. You say you can dramatically decrease the intake temperature? By how much and decrease it from what standard? Ambient air temp? Engine bay temp? If I'm reading into this correctly (and it's simply an air intake) odds are it's going to be some sort of ram air design, routing intake flow from an area say, like the front grill in the bumper or a duct leading into an intake port on the hood? I'm assuming to you're keeping the kinks and bends in the system to a minimum to keep the air flow smooth? Pardon the questions but the claims warrant it.

 

This is not no standard cool air induction system! the air is actually cooled before it is forced into the manifold? get the picture? Sorry i just cant through my diagram up because i dont want someone taking my plans because i dont have a patent yet because it is going to cost over 5,000$ to get one.

 

hello again i tried to post my rough draft of my design but im not sure how to do so? it wont alow me to copy and paste anything onto the forum What can i do ???????????????????????????????????? the sonner i get help the sonner youll see my idea

 

Either host the pic elsewhere and put an img link to it or click that "attach image" and it'll upload the image from your hard disk. Just to stress the obvious though (because people do it fairly often) if you try to link to a pic on your hard disk we will not be able to see it.

 

I had a 72SS nova that I raced on the street,and it had a dry ice cool can to cool the air. Is it something along that line?????

 

Don't feed the troll.

Can I have some of the crack you are smoking ricer?

 

See paul, this is what you get when you delete my posts about being mature, and not throwing around insults...

MMS, this thread has been heavily edited to remove comments like that, so, keep em to yourself. While I doubt that this will put out these numbers, I don't know for sure, and plus, if it helps even a little, it might help in a different application. Need is the mother of innovation.

 

do I detect censorship?
I thought that one of the purpose of these forums was to share opinions, information and ideas in a constructive manner. Why are some of the postings being deleted or "edited".