I'm dying to take off my ugly gray steering wheel and putting in a sparco steering wheel but the problem is that i dont know how! Guys, help a brother out!

Streetsleeper8

 

aiite i made about this and no one helped... so i figured it out for myself.. i switched mine to a evo 8 steering wheel..

STEP 1: get a star alan-wrench put it in the side hole lower left hand side..
STEP 2: Losen it (its pretty tight so work with it)
STEP3: the wheel should then slide out.. disconnect the the plugs on the bottom..(cruise control and airbag

this should have the steering wheel off... make sure to unplug the battery and wait at least 10 mins to be safe... hope this helps .

~mark

 

thats all there is to it? seems so easy!

 

it is my friend, it is... basically that one spot holds the wheel.. its not necessarily a screw but a place that losens and tights the clamp that holds the wheel... thats it!

NOW.. with the hUB... your on your own.. never installed one...

 

Ugh. Please read the announcement in the HT/I forums. Moving.

 

like ewww someone has a major attitude