Ralliart Crossdrilled Slotted Rotors
 

Hello everyone. I have 10 sets of rotors available for the Lancer Ralliart. The rotors can either be drilled, slotted, dimpled, or combination of either. The prices and dimensions of the rotors are as follow:

Front X-Drilled Slotted Rotor = $75.00/ per rotor

-Outside Diameter = 276mm
-Height = 45.7mm
-Bolt Pattern = 5-4 1/2

Rear X-Drilled Slotted Rotor = $70.00/ per rotor

-Outside Diameter = 261.9mm
-Height = 60mm
-Bolt Pattern = 5-4 1/2

Contact: steven
Work: 714-777-2323 x 7006
Email: steven@r1concepts.com

What about the warranty? No worries. Slam on the brakes as hard as you want. Try cracking them if possible. All rotors will have 90 days full replacement warranty. We stand behind our products and will take good care of our customers.

All R1 Concepts Rotors are certified to meet QS and ISO Quality System Standards. All rotors are manufactured to OE specifications using the same process as the factory does.

Below is a sample picture what the patterns on the rotors will look like. The rotors will have a black hub and the inner vents will also be black. However, the bolt pattern will look different.

http://www.r1concepts.com/images/31109.jpg

http://www.r1concepts.com/images/300zxforum.jpg

you list them as crossdrill slotted.. but in the picture it's either or

can I get them just slotted?

-joe

Thats what he was saying..."you can get either or a combination"

They look nice though!

R1 Concepts - Forgot to ask...what about shipping? Does the listed costs include this? Any package deal if you get a set of 4?

do you make any to fit the EVO?

Sillypuddy, yes you can get them slotted only for the same price.



D-Mac, the prices given above are already discounted for Evolutionm.net members. The original price goes anywhere from $90-$110 per rotor.



Sentinel, I’m also posting a group buy for EVO owners. Check it out here: https://www.evolutionm.net/forums/showthread.php?t=91757

bump

bump

I want front pair please? I wil pm u

wow, great prices! some question though: how much weight is lost on the cross-drilling? It looks REALLY aggressive and im worried about the lose of mass effecting the life. over heating will cause excess strain and drilling weakens the discs. I saw the 90 day warrant, but if cracking is going to occur, it prob wont do so in the first 90 days.

do you make these in-house? how much does the disc weigh before and after drilling?

im not questioning the product or anything, just want to know what kinda how well the product has been tested.

thx and keep the RA products coming!

bump

Although we do the machine work of the rotors in-house, we have not measured the exact weight of the rotors once they are drilled. However, if you are worried about weakening the structure of the rotors, I recommend going with slotted only rotors.

can you post a pic of your rotors with a drill/slot combo pattern?

bump? anyone try these yet?

is the black paint, powder coated? also, Are these stock rotors that you machine into slotted/dimpled rotors?

thanks
eric