Ralliart Crossdrilled Slotted Rotors
#1
Former Sponsor
Thread Starter
iTrader: (16)
Join Date: Jul 2004
Location: La Habra, CA
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Ralliart Crossdrilled Slotted Rotors
Hello everyone. I have 10 sets of rotors available for the Lancer Ralliart. The rotors can either be drilled, slotted, dimpled, or combination of either. The prices and dimensions of the rotors are as follow:
Front X-Drilled Slotted Rotor = $75.00/ per rotor
-Outside Diameter = 276mm
-Height = 45.7mm
-Bolt Pattern = 5-4 1/2
Rear X-Drilled Slotted Rotor = $70.00/ per rotor
-Outside Diameter = 261.9mm
-Height = 60mm
-Bolt Pattern = 5-4 1/2
Contact: steven
Work: 714-777-2323 x 7006
Email: steven@r1concepts.com
What about the warranty? No worries. Slam on the brakes as hard as you want. Try cracking them if possible. All rotors will have 90 days full replacement warranty. We stand behind our products and will take good care of our customers.
All R1 Concepts Rotors are certified to meet QS and ISO Quality System Standards. All rotors are manufactured to OE specifications using the same process as the factory does.
Below is a sample picture what the patterns on the rotors will look like. The rotors will have a black hub and the inner vents will also be black. However, the bolt pattern will look different.
Front X-Drilled Slotted Rotor = $75.00/ per rotor
-Outside Diameter = 276mm
-Height = 45.7mm
-Bolt Pattern = 5-4 1/2
Rear X-Drilled Slotted Rotor = $70.00/ per rotor
-Outside Diameter = 261.9mm
-Height = 60mm
-Bolt Pattern = 5-4 1/2
Contact: steven
Work: 714-777-2323 x 7006
Email: steven@r1concepts.com
What about the warranty? No worries. Slam on the brakes as hard as you want. Try cracking them if possible. All rotors will have 90 days full replacement warranty. We stand behind our products and will take good care of our customers.
All R1 Concepts Rotors are certified to meet QS and ISO Quality System Standards. All rotors are manufactured to OE specifications using the same process as the factory does.
Below is a sample picture what the patterns on the rotors will look like. The rotors will have a black hub and the inner vents will also be black. However, the bolt pattern will look different.
Last edited by r1concepts; Dec 20, 2011 at 03:45 PM.
#6
Former Sponsor
Thread Starter
iTrader: (16)
Join Date: Jul 2004
Location: La Habra, CA
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Sillypuddy, yes you can get them slotted only for the same price.
D-Mac, the prices given above are already discounted for Evolutionm.net members. The original price goes anywhere from $90-$110 per rotor.
Sentinel, I’m also posting a group buy for EVO owners. Check it out here: https://www.evolutionm.net/forums/showthread.php?t=91757
D-Mac, the prices given above are already discounted for Evolutionm.net members. The original price goes anywhere from $90-$110 per rotor.
Sentinel, I’m also posting a group buy for EVO owners. Check it out here: https://www.evolutionm.net/forums/showthread.php?t=91757
Trending Topics
#10
Evolved Member
iTrader: (6)
wow, great prices! some question though: how much weight is lost on the cross-drilling? It looks REALLY aggressive and im worried about the lose of mass effecting the life. over heating will cause excess strain and drilling weakens the discs. I saw the 90 day warrant, but if cracking is going to occur, it prob wont do so in the first 90 days.
do you make these in-house? how much does the disc weigh before and after drilling?
im not questioning the product or anything, just want to know what kinda how well the product has been tested.
thx and keep the RA products coming!
do you make these in-house? how much does the disc weigh before and after drilling?
im not questioning the product or anything, just want to know what kinda how well the product has been tested.
thx and keep the RA products coming!
#12
Former Sponsor
Thread Starter
iTrader: (16)
Join Date: Jul 2004
Location: La Habra, CA
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Although we do the machine work of the rotors in-house, we have not measured the exact weight of the rotors once they are drilled. However, if you are worried about weakening the structure of the rotors, I recommend going with slotted only rotors.